Batelco SignalBoost User Manual page 4

Home and office mobile coverage booster
Table of Contents

Advertisement

• The SignalBoost is intended for indoor application only and must
be kept dry at all times. Any moisture may damage the device. If
evidence of condensation is present, unplug the SignalBoost im-
mediately and do not operate until completely dry.
• Do not disassemble the SignalBoost or its mains adaptor for any
reason.
• Do not attempt to power the SignalBoost with any power adapter
other than the one included with your device. If the included
power adapter does not appear to be working, contact your mo-
bile service provider to obtain a replacement.
• Before using the mains adaptor, verify that the mains voltage is
within the range specified by the voltage printed on the mains
adaptor.
• When disconnecting the mains adaptor from the mains, pull the
plug. Pulling the cable may result in damage to the cable.
Interference with Electronic Devices
• Installing the SignalBoost adjacent to any unshielded electronic
devices may result in electronic interference.
• The SignalBoost may interfere with hearing aids.
Electrical Safety continued
NOTICE
4

Advertisement

Table of Contents
loading

Table of Contents