Table of Contents
Advertisement
Regulatory Notices
US FCC Compliance
FCC CFR47 Part 15B: Variants 237B, BA, C, CA
•
FCC CFR47 Parts 22, 24: Variants 237B, BA
•
FCC CFR47 Part 27: Variants 237C, CA
•
Note: Changes or modifications not expressly
approved by the party responsible for compli-
ance may void the user's authority to operate this
equipment.
The FCC IDs for nano3G S8 AP model variants are:
Model
nano3G 237B
nano3G 237BA
nano3G 237C
nano3G 237CA
WARNING
This is a class B product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio communica-
tions. Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC ID
QGGIPA237B
QGGIPA237BA
QGGIPA237C
QGGIPA237CA
EU Regulatory Compliance
Models nano3G 237A and 237AA conform to the
following regulatory standards:
Health
(Art 3.1(a)):
Safety
(Art 3.1(a)):
EMC
(Art 3.1(b)):
Spectrum
(Art 3.2):
This product is intended for use in all Member
States of the European Union.
"Hereby, ip.access Ltd, declares that this nano3G
S8 AP is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC."
A copy of regulatory compliance documenta-
tion may be obtained in writing from "IP Access
Ltd, Building 2020, Cambourne Business Park,
Cambourne, Cambridge, CB23 6DW, UK".
Safety Standards
IEC 60950-1:2005 (2nd Edition), EN 60950-
1:2006 and UL60950-1:2007
The power adapter, as well as the POE inserter
and splitter supplied by ip.access comply with
LPS requirements in accordance with IEC/EN
60950-1.
EN50385: 2002
EN60950-1: 2006
EN 301 489-23 V1.3.1,
EN 301 489-1 V1.8.1
EN 301 908-1 V4.2.1,
EN 301 908-3 V4.2.1
16
Advertisement
Table of Contents
