Table of Contents
Advertisement
Placement Of Your Signalboost
The SignalBoost is a wireless transmitter. For maximum coverage, place your
SignalBoost in a central location. Alternatively, locate it in the room where you
use your mobile phones and other 3G devices most frequently.
Ensure that the Signalboost cables are out of the way of high traffic areas, chil-
dren and household pets to avoid choking, tripping, or damage to the cables
and the nano3G AP.
Place the AP vertically on a flat stable surface.
Where possible, place the Signalboost high up to give it a good 'line of
sight'.
Do not position the AP close to large electrical objects. For example:
televisions, refrigerators, microwave ovens, hi-fi equipment and
speakers. This is to avoid interference with the signal.
Place the AP in a location that allows free air circulation around the
unit to avoid overheating.
Put the Signalboost clear of surrounding objects.
The recommended minimum clearance is 10cm around the Signal-
boost .
Do not position the AP where it will be directly affected by a heat
source, including direct sunlight.
CAUTION
10
Advertisement
Table of Contents
