Using the radio
Numbered
buttons
FUNCTIONS
Tuning
This
unit only
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button:
MANUAL()PRESET
Press [X TUNING W] to select the frequency.
3
≥ To start automatic tuning, press and hold
[X TUNING W] until the frequency starts scrolling.
Tuning stops when a station is found.
∫ If noise is excessive
When "FM" is selected
Press and hold [—FM MODE] on
this unit to display "MONO".
Press and hold [—FM MODE] again to cancel the mode.
≥The mode is also canceled when you change the
frequency.
When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2()BP 1
Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button:
MANUAL()PRESET
34
TUNER/BAND
ONE TOUCH PLAY
ENTER
MEMORY
-TUNE MODE / -FM MODE
SELECTOR
e.g. Display
MONO
Press [X TUNING W] to tune to the preferred
3
frequency and press [ENTER].
4
While the frequency and "PGM" are flashing on the display
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. To select 12:
[S10] ➜ [1] ➜ [2]
Alternatively, press [X, W], and then press [ENTER].
The station occupying a channel is erased if another
station is preset to that channel.
Presetting stations automatically
This
unit only
TUNING
Up to 15 stations can be set in each band, FM and AM.
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button:
MANUAL()PRESET
Press [X TUNING W] to tune to the frequency
3
where you want to begin presetting.
≥ Set the channel reception (FM: 87.50, AM: 522)
if you want to begin presetting from the lowest
frequency.
4
Press and hold [MEMORY].
Release the button when "FM AUTO" or "AM AUTO"
is displayed.
This unit presets the stations it can receive into the
channels in ascending order.
≥ It automatically stops searching when 15 stations
are preset to the last.
≥ "SET OK" is displayed when the stations are set,
and the radio tunes to the last preset station.
≥ "ERROR" is displayed when automatic presetting
is unsuccessful. Preset the channels manually
(➜ left).
ST
SRD
E.
HDCD
Selecting the preset channels
H.BASS
PGM
W
1
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "PRESET".
Each time you press the button:
MANUAL()PRESET
3
Press the numbered buttons to select the
channel.
≥ To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X, W].
When a stereo FM broadcast is being
received, "ST" lights in the display.
e.g. Display
DISC SFC TG
D.MIX MONO SLP
e.g. Display
PRG
DISC SFC TG
D.MIX MONO SLP
DE
S
A
AC
ST
SRD
E.
HDCD
H.BASS
PGM
W
1