Panasonic SC-HT855 Operation Manual page 13

∫ Television with COMPONENT VIDEO IN terminals
The COMPONENT VIDEO OUT terminals provides a
purer picture than the S-VIDEO OUT terminal. These
terminals can be used for either interlaced or
progressive output. Connection using these terminals
outputs the colour difference signals (P
luminance signal (Y) separately in order to achieve high
fidelity in reproducing colours.
Back of this unit
Television
Audio cable
(not included)
(not included)
COMPONENT
AUDIO
VIDEO IN
VIDEO IN
OUT
P
B
L
P
S-VIDEO R
R
IN
Y
§
This audio connection will enable you to play audio from your television through your home theater system.
Refer to "Operating other equipment" (➜ page 39).
You can also connect to the AUX terminals on this unit. The TV AUDIO IN and AUX terminals are for external
audio input.
To enjoy progressive video
≥ Connect to a progressive output compatible television.
1 Set "Video Output" to "Off" (➜ page 32, "HDMI" menu).
2 Set "Video Output Mode" to "480p" or "576p", and then follow the instructions on the menu screen
(➜ page 28, Picture Menu).
≥ Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible.
Consult the manufacturer if you have another brand of television.
/P ) and
B R
r
L
s
R
TV TV
AUDIO AUDIO
IN IN
§
Video cables
(not included)
≥ The description of the component video input
terminals depends on the television or monitor
(e.g. Y/P /P , Y/B-Y/R-Y, Y/C
B R
terminals of the same colour.
≥ When making this connection, select "Video/YPbPr"
(Video and YPbPr) or "S-Video/YPbPr" (S-Video and
YPbPr) from QUICK SETUP (➜ page 16). If "RGB/No
Output" (RGB only) is selected, the RGB signal is
output from the SCART (AV) terminal, but no signal is
output from the component video output terminals.
COMPONENT VIDEO OUT
Y
P
B
P
R
VIDEO VIDEO S-VIDEO S-VIDEO
AUX AUX
OUT OUT OUT OUT
/C ). Connect to
B R
AV
AV OUT
OPTICAL IN
13