Panasonic SC-HT855 Operation Manual page 45

Picture abnormal or unviewable
The picture on the
television is not displayed
correctly or disappears.
Picture size does not fit
the screen.
Picture stops. [DivX]
Menu is not displayed
correctly.
Auto zoom function does
not work well.
When playing PAL disc,
picture distorted.
Progressive video
There is ghosting when
progressive or HDMI
output is on.
Pictures not in
progressive output.
≥ The unit and television are using different video systems. Use a multi-
system or PAL television.
≥ The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL
television ("NTSC Disc Output" in "Video" menu).
≥ Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder.
≥ Mobile telephone chargers can cause some disturbance.
≥ If you are using an indoor television antenna, change to an outdoor antenna.
≥ The television antenna wire is too close to the unit. Move it away from the unit.
≥ Change "Source Select" in Picture Menu. [DivX]
≥ Picture may not be seen when more than 4 devices are connected with
HDMI cables. Reduce the number of connected devices.
≥ When using HDMI output, the video signal is progressive. Use other video
connections if your television is not compatible with progressive video.
≥ If the picture is distorted or not displayed when using HDMI output, press
and hold [CANCEL] until the picture is displayed correctly. (The output will
return to "480p"or "576p".)
≥ When using SCART (AV) terminal, set "Video Output" in the "HDMI" menu to
"Off".
≥ Change "TV Aspect" in the "Video" menu.
≥ Use the television to change the aspect. If your television does not have that
function, change "4:3 Aspect" in Display Menu.
≥ Change the zoom setting. ("Just Fit Zoom" or "Manual Zoom" in Display Menu)
≥ Picture may stop if the DivX files are greater than 2 GB.
≥ Restore the zoom ratio to "k1.00". ("Manual Zoom" in Display Menu)
≥ Set "Subtitle Position" in Display Menu to "0".
≥ Set "4:3 Aspect" in Display Menu to "Normal".
≥ Turn off television zoom function.
≥ Use the other preset aspect ratios or manual adjustment.
≥ Zoom function may not work well, especially in dark scenes and may not
work depending on the type of disc.
≥ Set "Transfer Mode" in Picture Menu to "Auto".
≥ This problem is caused by the editing method or material used on DVD-
Video, but should be corrected if you use interlaced output. Set "Video
Output Mode" in Picture Menu to "480i" or "576i". (Alternatively, press and
hold [CANCEL] to switch to "480i" or "576i".)
≥ Disable the HDMI AV OUT connection and use other video connections.
Make the settings in the following order:
1 Set "Video Output" in the "HDMI" menu to "Off".
2 Set "Video Output Mode" in Picture Menu to "480i" or "576i". (Alternatively,
press and hold [CANCEL] to switch to "480i" or "576i".)
≥ Select "480p" or "576p" in "Video Output Mode" in Picture Menu.
≥ The unit's VIDEO OUT, S-VIDEO OUT or SCART (AV) terminal outputs the
interlaced signal even if "PRG" is displayed.
Page
—
—
31
—
—
—
—
28
—
10, 12
, 13
—
32
31
29
29
—
29
29
29
—
29
—
28
28
28,
32
28
10,
12
(Continued on next page)
45