Advanced Settings; Recall Time; Dial Mode; Temporarily Switch From Pulse To Tone Dialling - Motorola CD201 User Manual

8. Advanced settings

This setting is useful to access certain network and PABX/
switchboard services.
8.1

Recall time

The default CD2 recall time is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
m d
1. Press , scroll
RECALL TIME
2. is displayed. Press
u d
3. Press or to select the setting you want:
MEDIUM LONG
, .
m
4. Press to confirm.
>
5. Press to return to standby.
NOTE
The use of your CD2 cannot be guaranteed on all PABX.
8.2

Dial mode

The default CD2 dialling mode is suitable for your country
and network operator. It is unlikely that you should need to
change this setting unless advised to do so.
m d
1. Press , scroll
d
DIAL MODE
2. Scroll to . Press
Advanced settings
m
ADVANCED SET
to and press
m
.
SHORT
m
ADVANCED SET
to and press
m
.
u d
3. Press or
m
4. Press
>
5. Press to return to standby.
8.2.1 Temporarily switch from Pulse to Tone
dialling
1. Press and hold
The dial mode will change from Pulse to Tone for the
duration of the call.
.
8.3

Call barring

Prevent certain numbers from being dialled from your CD2.
,
Store up to four specific numbers, each up to 4 digits – for
example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
on your screen in standby mode.
8.3.1

Switch call barring on/off

m
1. Press , scroll
d
CALL BARRING
2. Scroll to
3. Enter the master PIN (default setting 0000) and press
m
.
.
MODE
4. is displayed. Press
TONE PULSE
to select or .
to confirm.
*
.
BARR MODE ON
will be displayed
d
ADVANCED SET
to and press
m
. Press .
m
.
m
.
29