Battery Replacement; Calibration And Repair Services; Vii. Battery Replacement - Extech Instruments K.J.E.T. 422324 Instruction Manual

VII. BATTERY REPLACEMENT

1. When battery power falls low, the
Replace the six 1.5V 'AAA' batteries
2. After the temperature probe(s) have been disconnected and the
meter power turned o , remove the rear battery cover.
3. Remove batteries from the holder and replace with six 1.5V
'AAA' alkaline batteries.
4. Secure the battery cover.
VIII. Calibration and Repair Services
Extech o ers complete repair and calibration services
products we sell. For periodic calibration, NIST certi cation on most
products or repair of any Extech product, call customer service for
details on services available. Extech recommends that calibration be
performed on an annual basis to ensure calibration integrity.
Tech support: Ext. 200; Email: support@extech.com
Repair/Returns: Ext. 210; Email: repair@extech.com
Copyright © 2002 Extech Instruments Corporation.
All rights reserved including the right of reproduction in whole or in part in any form.
more infor for
Phone: 01235 838 555
Email: cs@airconcern.co.uk
Web. www.airconcern.co.uk
Air Concern Ltd, Building 173 Curie Avenue Harvell Didcot, Oxfordshire
will appear on the LCD.
Support Hotline (781) 890-7440
Website: www.extech.com
Version 1.0 August 2002
Extech 422324
for all of the