Related Manuals for Extech Instruments 42512
Summary of Contents for Extech Instruments 42512
- Page 1 User Manual Dual Laser InfraRed (IR) Thermometer MODEL 42512...
- Page 2 Introduction Congratulations on your purchase of the Model 42512 IR Thermometer. This Infrared thermometer measures and displays non-contact temperature readings up to 1832 (1000 C). At 30”, built-in dual lasers converge to 1” target spot to insure accurate targeting and temperature measurement. The adjustable emissivity feature allows the IR thermometer to measure the temperature of virtually any surface.
- Page 3 42512-EU V7.1 02/09...
- Page 4 M e a s u r e m e n t s 1. H o l d t h e m e t e r b y 42512-EU V7.1 02/09 O p e r a t i n g I n s t r u c t i o n s T e m p e r a t...
- Page 5 (Low Alarm On/Off) Press the ▲ or ▼ buttons to turn the High Alarm feature ON or OFF. (Low Alarm setting) Press the ▲ or ▼ buttons to set the Low alarm limit value in the main display. 42512-EU V7.1 02/09...
- Page 6 You can hand over your used batteries / accumulators at collection points in your community or wherever batteries / accumulators are sold! Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle 42512-EU V7.1 02/09...
- Page 7 The meter can measure from moderate distances but the measurement may be affected by external sources of light. In addition, the spot size may be so large that it encompasses surface areas not intended to be measured. 42512-EU V7.1 02/09...
- Page 8 Timber 0.90 Ceramic 0.90 to 0.94 Paper 0.70 to 0.94 Marble 0.94 Chromium Oxides 0.81 Plaster 0.80 to 0.90 Copper Oxides 0.78 Mortar 0.89 to 0.91 Iron Oxides 0.78 to 0.82 Brick 0.93 to 0.96 Textiles 0.90 42512-EU V7.1 02/09...
-
Page 9: Specifications
7 seconds, with LOCK to disable Dimensions 146 x 104 x 43mm (5.7 x 4 x 1.6”) Copyright © 2009 Extech Instruments Corporation (a FLIR company) All rights reserved including the right of reproduction in whole or in part in any form. more info for...
Need help?
Do you have a question about the 42512 and is the answer not in the manual?
Questions and answers