movistar Home Station Fibra Óptica Installation Manual page 9

You will need to configure the wireless client for your PC using these parameters. For more
information, see the following page.
4.1.1 WPS Connection
The "Home Station Fibra Óptica" is also compatible with the wireless connection secure ex-
change protocol WPS. It is important to take into account that, in order to use this wireless
association method, the wireless client (the system used to connect to the "Home Station
Fibra Óptica") must be WPS-compatible.
Press the "WPS" button located on the side panel of the "Home Station Fibra Óptica". Then,
press the "WPS" button on the wireless client (for more information, refer to the user ma-
nual of your wireless device). You have 120 seconds to carry out the association; otherwise,
the "Home Station Fibra Óptica" will inhibit WPS association and will not allow any WPS
wireless client to register.
4.1.2 Connecting to an External Wireless Device
1. If you have an external wireless device (PCMCIA or USB), install it following the steps
described in the user manual supplied by the manufacturer. If your system has a
built-in device, verify that it is enabled.
2. Access the management application for your wireless device. To do this, access the
appropriate icon located on the system tray (next to the clock). Right-click on the
icon and select "View available wireless networks".
3. Search for available wireless networks. To update this list, click on "Refresh network
list". Select the network with the identifier (SSID) that matches the one written on
the label found on the back of the "Home Station Fibra Óptica", and press "Connect".
4. Enter the key that appears on the label supplied with your Home Station. Make sure
you enter the key exactly as it appears on the label.
5. Finally, connect to the wireless network and check that it works correctly.
NOTE: For operating systems other than Windows XP SP2, refer to the help supplied with
the OS.
9