Wireless Network - movistar Home Station Fibra Óptica Installation Manual

Table of Contents

Advertisement

4 Connecting the "Home Station Fibra Óptica" to the PC
The "Home Station Fibra Óptica" is supplied with the wireless network disabled.

4.1 Wireless Network

Follow the steps below to enable the wireless network via the hardware.
1. Locate the "WiFi" button on the side of the "Home Station Fibra Óptica".
2. Press the button once and the "Wireless" LED will switch on.
The configuration parameters for your wireless network appear on the label on the back of
the "Home Station Fibra Óptica".
8
Warning: Please do not switch off your device or disconnect it
from the mains while this updating is being carried out: you
may seriously damage the system.
This process can take some 10 to 11 minutes after which your
device will automatically restart.
will flash in red and, once the process has successfully finished,
then switch to a steady green.
3 Connecting the Ethernet Cable to the ONT
Connect one end of the yellow Ethernet cable to the LAN connector on
your ONT fiber device and the other end to the "Home Station Fibra
Óptica" connector labelled Internet.
After a few seconds, the Internet LED will light up green if the ONT is on.
At this point the Power LED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents