movistar Home Station Fibra Óptica Installation Manual page 10

4.2 Connecting via Cable
Connect one end of one of the yellow Ethernet cables to the Ethernet card in your PC and
connect the other end to one of the connectors on the "Home Station Fibra Óptica" labelled
Eth 1-4. The other yellow Ethernet cable should connect the ONT to the WAN port of the
"Home Station Fibra Óptica".
Switch on the PC. After a few seconds, the LAN LED for the connector to which the cable is
connected will light up green. To ensure connectivity, your PC must have the DHCP client
enabled for the Ethernet interface (you may need to refer to the operating system help).
10