movistar Home Station Fibra Óptica Installation Manual page 7

After switching on the router, you will see the following activity
on the LED indicators:
• The Power LED indicator will start flashing in red and
green, indicating that the "Home Station Fibra Óptica" is
initialising. Once the process is completed, the LED will
indicate a constant green light.
• The Internet LED will show the Internet connection sta-
tus. When there is no Internet connection, the LED will
be off. If it lights up red, it means that the configuration
is incorrect and connection to the Internet is therefore
impossible. If it lights up green, this means that there is
an Internet connection through the ONT.
• The Broadband LED indicates whether there is any acti-
vity on the interface labelled Internet, i.e. the WAN.
• The Ethernet LED flashes green if there is activity on the
Eth. 1 – Eth.2 - Eth. 3 – Eth.4 switches.
• The Wireless LED will light up green if the wireless inter-
face is on. It will also flash when there is any activity on
this interface.
• The USB LED shows if there is activity on the USB con-
nection.
Movistar may at any point, particularly after initial installation,
automatically and remotely execute software updating on your
device thus providing a better service. During this process the
Power LED located on the front panel will flash in green.
7