How To Initialize The Setting - JVC TM-A130SU Instructions Manual

HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the POWER (
OFF ( ).
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
button, press the POWER (
power ON (
POWER
PHASE MENU
3. Setting
Initialization is required.
CONTRAST
Initialization is not required.
+
–
VOLUME/SELECT
10
) switch to turn the power
) switch to turn the
).
The <SET-UP MENU> RESET screen is displayed.
Note:
ON
OFF
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
Press the CONTRAST (
* When initialization is completed, and the <SET-UP
MENU> RESET screen disappears.
Press the VOLUME/SELECT [+] or [–] buttons.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
) button.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <CONTRAST>
"No" then <+>
Initial settings
)
Functions (Items)
SHARPNESS
COLOR SYSTEM
H. POSITION
WHITE BALANCE
R. CUT OFF
G. CUT OFF
B. CUT OFF
R. DRIVE
B. DRIVE
CONTROL LOCK
PHASE
CHROMA
CONTRAST
BRIGHT
VOLUME
or <–>
Initialization
(setting)
00
AUTO
00
00
00
00
00
00
OFF
00
00
00
00
20