JVC TM-A130SU Instructions Manual page 8

HOW TO USE THE MENU
FUNCTIONS
DISPLAY AND SELECTIONS IN THE <SET-UP MENU>
MODE (SETTING)
You can set the following set-up menu items.
● H. POSITION
Note:
● Parameters for H. POSITION can be set separately depending on the video input (Input
A or Input B) selected by the input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
1. While pressing the MENU button, press the
PHASE (
PHASE MENU
2. Press the PHASE (
to select the desired menu item.
PHASE CHROMA
H. POSITION
WHITE BALANCE
CONTROL LOCK
3. Press the VOLUME/SELECT buttons to set.
+
–
VOLUME/SELECT
8
(cont'd)
● WHITE BALANCE
) button.
The <SET-UP MENU> screen is displayed.
) or CHROMA (
A selection mark (3) is put next to the selected item.
Front panel Function
button displayed
PHASE ( )
5
CHROMA ( )
Front panel Function
button displayed
+
VOLUME/ 3
SELECT (+)
CUTO
–
VOLUME/
2
SELECT (–)
DRV
Notes:
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
● To return to the <SET-UP MENU> screen, press the EXIT
(MENU) button.
● CONTROL LOCK
) button
Contents
Advance selection mark (3)
Reverse selection mark (3)
Contents
Increase (to max. value)
Advance the setting value
Selects CUT OFF setting
screen
Decrease (to min. value)
Reverse the setting value
Selects DRIVE setting screen
<SET-UP MENU> screen
1
<SET–UP MENU>
‰ H. POSITION
:
WHITE BALANCE
CONTROL LOCK : OFF
2
EXIT
–
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
<Front panel button>
1 Selection mark (3 3 3 3 3 ): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
Function
Contents
displayed
Advance the menu item.
5
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Advance the setting value.
2
Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen. (release)
DRV Selects DRV adjustment.
Selects CUT OFF
CUTO
adjustment.
R Adjusts red signal level.
G Adjusts green signal level.
B Adjusts blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
00
3
4
+