How To Initialize The Setting - JVC TM-1600SU - Color Monitor Instructions Manual

HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power (
—
OFF ( ).
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
buttons, press the Power (
_
power ON (
POWER
PHASE MENU
3. Setting
Initialization is required.
CONTRAST
Initialization is not required.
– +
VOLUME/SELECT
10
) Switch to turn the power
) switch to turn the
).
The <SET-UP MENU> RESET screen is displayed.
Note:
ON
OFF
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
Press the CONTRAST (
* When initialization is completed, and the <SET-UP
MENU> RESET screen disappears.
Press the VOLUME/SELECT [+] or [–] button.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
) button.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <CONTRAST>
"No" then <+>
)
Initial settings
Functions (Items)
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
BRIGHTNESS P.S. OFF
H. POSITION
V. POSITION
WHITE BALANCE
R. CUT OFF
G. CUT OFF
B. CUT OFF
R. DRIVE
G. DRIVE
B. DRIVE
CONTROL LOCK
B.P.S. LEVEL
REMOTE SELECT 00
PHASE
CHROMA
CONTRAST
BRIGHT
VOLUME
or <–>
Initialization
(setting)
00
6500
AUTO
4–3
00
00
00
00
00
00
00
00
OFF
10
00
00
00
00
20