Konica Minolta bizhub C554e Quick Manual page 32

2
No. Name
1 Main unit
2 Fax Kit FK-511
3
Authentication Unit
AU-102 (Biometric Type)
4 Authentication Unit
AU-201 (IC Card Type)
5 Working Table WT-506
6 Keypad KP-101
7 Keyboard Holder KH-102
8 Security Kit SC-508
9 Mount Kit MK-730
10 Image Controller IC-414
11 Large Capacity Unit
LU-301
12 Large Capacity Unit
LU-204
13
Desk DK-510
14 Paper Feed Cabinet
PC-410
15 Paper Feed Cabinet
PC-210
16
Paper Feed Cabinet
PC-110
17
Desk DK-705
18 Saddle Stitcher SD-511
19 Finisher FS-534
20
Punch Kit PK-520
21
Saddle Stitcher SD-512
22
Finisher FS-535
23
Punch Kit PK-521
24 Z Folding Unit ZU-606
25 Job Separator JS-602
26
Post Inserter PI-505
27 Output Tray OT-506
28
Finisher FS-533
29
Punch Kit PK-519
30
Job Separator JS-506
The following options are built into this machine and are not shown in the figure above.
31
Stamp Unit SP-501
2-6
Description
Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
Required to use the fax function.
Working Table WT-506 is required as a stand.
Working Table WT-506 is required as a stand.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the hardware keypad.
Install this holder to use an external keyboard.
Supports functions such as Copy Guard to prevent unauthorized
copying.
Used to print on banner paper.
Built-in Image Controller. Installing this unit provides higher quality
printing results.
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size
paper.
Used to place this machine on the floor.
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
Can load up to 500 sheets respectively into the top and bottom
trays.
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
Used to place this machine on the floor.
Used to add the bind/fold function to the Finisher FS-534.
Sorts, groups, or staples output sheets as required.
Used to add the punch function to the Finisher FS-534.
Used to add the bind/fold function to the Finisher FS-535 (only for
bizhub C554e).
Sorts, groups, or staples output sheets as required (only for bizhub
C554e).
Used to add the punch function to the Finisher FS-535 (only for
bizhub C554e).
Adds the Z-fold or punch function to the Finisher FS-535 (only for
bizhub C554e).
Feeds out printed sheets (only for bizhub C554e).
Inserts a cover sheet into copied or printed sheets (only for bizhub
C554e).
Collects printed pages.
Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
Used to add the punch function to the Finisher FS-533.
Used to separate output sheets into two trays in the body of the ma-
chine.
Stamps a scanned original when sending a fax.
bizhub C554e/C454e/C364e/C284e/C224e
About this machine 2.2