Table of Contents
Advertisement
Specifications
7 General
Model name
DT-V17L2D
Type
Multi format LCD monitor
Screen size
Type 17 wide format
Aspect ratio
16:10
LCD panel
17˝ wide, active matrix TFT
Effective screen size
Width: 367.2 mm
Height: 229.5 mm
Number of pixels displayed
1 440 x 900
Number of colors displayed
16.77 million
Viewing angle (TYP.)
160° (Horizontally), 140° (Vertically)
Panel brightness (at least)
400 cd/m
2
(TYP.)
Contrast ratio (TYP.)
600:1
Horizontal/vertical frequency
H: 31.469 kHz – 75.000 kHz
(computer signal)
V: 60 Hz ± 5 Hz
* Some signals within this frequency range may not be displayed ("Out of
range" is displayed).
Compliant video signal format ☞ "Available signals" on page 9
Format
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output
Internal speaker: 1.0 W + 1.0 W
Operating conditions
Operating temperature: 0°C – 40°C
Operating humidity: 20% – 80% (non-condensing)
* Slightly variable depending on ambient conditions for installation.
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
DC 12 – 17 V
Rated current
0.56 A (AC 120 V)/0.36 A (AC 220 – 240 V)
3.0 A (DC 12 – 17 V)
External dimensions
Width:
395 mm (with the stand), 395 mm (without the stand)
(excluding protruding parts)
Height:
344.6 mm (with the stand), 304 mm (without the stand)
Depth:
243 mm (with the stand), 86 mm (without the stand)
Weight
8.1 kg (with the stand)
5.2 kg (without the stand)
Accessories
AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder),
Ferrite core x 1 (for external battery)
Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
7 Input/output terminals
VIDEO
Input/output of composite signal:
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
COMPO. (Y, P
/B-Y, P
/R-Y)
Input/output of analog component signal:
B
R
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
Digital signal output (compatible with EMBEDDED AUDIO signals):
(SWITCHED OUT)
AUDIO (IN)
Analog audio signal input:
AUDIO (MONITOR OUT)
Analog audio signal output:
REMOTE (MAKE/TRIGGER) ☞ "Using the MAKE/TRIGGER system" on page 14
REMOTE (RS-485)
☞ "Using the serial communication" on page 15
REMOTE (RS-232C)
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
1 line, BNC connector x 2, 1 V(p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination).
DVI-D connector x 1 (compatible with DDC2B)
1 line, BNC connector x 6
Y: 1 V(p-p), 75 Ω
/R-Y: 0.7 V(p-p), 75 Ω
P
/B-Y, P
B
R
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination).
auto detection, 1 line, BNC connector x 1
1 line switched out, BNC connector x 1
1 line, RCA connector x 2,
500 mV (rms), high impedance
1 line, RCA connector x 2,
500 mV (rms)
ENGLISH
17
Advertisement
Table of Contents
