Table Of Contents - JVC DT-V100CG Instructions Manual

POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 220-240 V (For European
countries, United Kingdom, or China), the power cord attached conforms to the following power supply voltage and countries. Use
only the power cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V
Countries : U.S.A. and Canada
Warning:
● Do not use the same Power Cord for AC 120 V as for AC 220-240 V. Doing so may cause malfunction, electric shock or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This
equipment is designed for professional video appliances and can be used in the following environments:
● Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors
environment (far away from railways, transmitters, overhead power lines, etc.)
In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not
exceeding the following length:
Cable
Power cord
Video signal cable
Audio signal cable
RS-485 cable
The inrush current of this apparatus is 35 ampere.
Caution
When in case that the strong electromagnetic waves or magnetism is near the audio cable or the signal cable, the sound or the
picture will contain noise. In such case, please keep the cable away from the sources of the disturbance.
CONTENTS
SAFETY PRECAUTIONS ........................................................................ 2
Controls and Features ........................................................................... 4
Preparation ............................................................................................. 7
Basic Menu Operations
(MAIN MENU, SET-UP MENU) .............................................................. 9
How to Use MAIN MENU ...................................................................... 11
How to Use SET-UP MENU .................................................................. 14
How to Use the External Control ........................................................ 19
Troubleshooting ................................................................................... 21
Self-check Indications .......................................................................... 22
Specifications ....................................................................................... 23
AC 220-240 V
European countries
EMC Supplement (Europe only)
Length
(attached cable) 2.0 m
(coaxial cable) 2.0 m
(shielded cable) 1.0 m
(twist pair cable) 10.0 m
AC 220-240 V
United Kingdom
Fuse
AC 220-240 V
China
3