JVC DT-V100CG Instructions Manual page 13

ASPECT SELECT/R-ASPECT SELECT
Selects the aspect ratio.
• 4:3/13:9/14:9
4:3
SAFETY MARKER/R-SAFETY MARKER
Displays dotted lines to indicate the areas
corresponding to 80%, 88%, or 90% of the screen
size (the aspect ratio setting in "ASPECT SELECT/
R-ASPECT SELECT").
OFF: SAFETY MARKER does not function.
80%: Marked area is 80% of the screen.
88%: Marked area is 88% of the screen.
90%: Marked area is 90% of the screen.
NOTES:
• Does not function when the ZOOM function is operated.
• When a picture of 4:3 aspect ratio is input, SAFETY MARKER for
4:3 screen is displayed.
• To display SAFETY MARKER for 16:9 screen ratio when a
picture of 16:9 aspect ratio is input, set "MARKER SELECT/R-
MARKER SELECT" to OFF. (In this case, setting of ASPECT
SELECT is invalid.)
COLOR MATRIX
The menu screen when
MANUAL is selected.
• The standard setting is set to "ITU601" or "ITU709"
depending on the input signal format.
The factory preset of MANUAL is ITU709.
Input Signal Format
NTSC, PAL, B/W (50 Hz/60 Hz),
480/60i, 576/50i
720/60p, 720/50p, 1080/50i,
1080/60i, 1035/60i, 1080/24psF
SELECT
Selects the picture matrix standard.
ITU601 or ITU709: Standard setting
MANUAL: Manual setting
NOTE:
The following items are displayed when MANUAL is selected.
When ITU601 or ITU709 is selected, they are not displayed.
13:9 14:9
Selects or adjusts the
standard of the color
demodulation (color
rendering).
Manual
Standard
setting
setting
(MANUAL)
ITU601
ITU709
ITU709
R-Y PHASE
Sets the R-Y phase.
• 90/92/94/112
R/B GAIN
Sets the R/B gain.
• 0.56/0.68/0.79/0.86
G-Y PHASE
Sets the G-Y phase.
• 236/240/244/253
G/B GAIN
Sets the G/B gain.
• 0.30/0.34/0.40/0.45
NOTE:
Adjustment value of each item in the standard setting (ITU601/
ITU709) is as follows:
R-Y PHASE
R/B GAIN
ITU601
G-Y PHASE
G/B GAIN
R-Y PHASE
R/B GAIN
ITU709
G-Y PHASE
G/B GAIN
ASPECT
Selects the aspect ratio.
• 4:3/16:9
DEGAUSS on
Degausses the screen.
While degaussing, "Degaussing!" is displayed on the
screen.
90
0.79
244
0.45
90
0.86
244
0.30
13