Console Port Speed; Log And Trace; Viewing Error Log; Figure 20-5 Menu 24.2.2 - System Maintenance - Change Console Port Speed - ZyXEL Communications ZyWALL 10/10 User Manual

Table 20-2 Fields in System Maintenance — Information
FIELD
IP Address
IP Mask
DHCP
When finished viewing, press [ESC] or [ENTER] to exit.

20.2.2 Console Port Speed

You can change the speed of the console port through Menu 24.2.2 – Console Port Speed. Your ZyWALL
supports 9600 (default), 19200, 38400, 57600, and 115200 bps for the console port. Use [SPACE BAR] to
select the desired speed in menu 24.2.2, as shown below.
Press Space Bar to Toggle.
Figure 20-5 Menu 24.2.2 — System Maintenance — Change Console Port Speed

20.3 Log and Trace

There are two logging facilities in the ZyWALL. The first is the error logs and trace records that are stored
locally. The second is the UNIX syslog facility for message logging.

20.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error/trace log. Follow the
procedure below to view the local error/trace log:
System Information & Diagnosis
This is the IP address of the ZyWALL in dotted decimal notation.
This shows the IP mask of the ZyWALL.
This field shows the DHCP setting of the ZyWALL.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 115200
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 10/10 II/50 Internet Security Gateway
DESCRIPTION
20-5