ZyXEL Communications ZyWALL 10/10 User Manual page 156

ZyWALL 10/10 II/50 Internet Security Gateway
FIELD
Default Policy Log
The following fields summarize the rules you have created. Note that these fields are read only. Click
the tab at the top of the box to order the rules according to that tab.
Source IP
Destination IP
Move Rule
To Rule Number
Click Apply to create a new firewall rule. New firewall rules are added at the end after existing
firewall rules. Click Edit to edit an existing filter rule. See section 13.5 for more details. Click Delete
to delete an existing firewall rule. Note that subsequent firewall rules move up by one when you take
this action. Click Help for online HTML help on fields in this screen
13-6
Table 13-1 Firewall Rules Summary — First Screen
Click this check box to log all matched rules in the ACL
default set.
No. This is your firewall rule number. The ordering of your
rules is important as rules are applied in turn. The Move
field below allows you to reorder your rules.
Status This field shows whether an individual rule has already
been Configured or is still Empty.
This is the source address of the packet.
This is the destination address of the packet.
Service This is the service to which the rule applies. See Table
13-2 for more information.
Action This is the specified action for that rule. Note that Block
means the firewall silently discards the packet.
Log This field shows you if a log is created for packets that
match the rule, don't match the rule, both or no log is
created.
Scroll right to see the Alert field. This field shows you if an
Alert
alert is generated when this rule is matched.
You may reorder your rules using this function. Select by
clicking on the rule you want to move. The ordering of
your rules is important as rules are applied in turn.
Select the number you want to move the rule to.
Move Click Move to move the rule.
DESCRIPTION OPTIONS
Empty
Configured
Block
Forward
Match
Not Match
Both
None
Yes
No
Creating Custom Rules