Figure 20-2 Menu 24.1 - System Maintenance - Status; Table 20-1 System Maintenance - Status Menu Fields - ZyXEL Communications ZyWALL 10/10 User Manual

ZyWALL 10/10 II/50 Internet Security Gateway
Step 2. In this menu, enter 1 to open System Maintenance - Status.
Step 3. There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
Port Status
WAN 10M/Half
LAN 10M/Half
Port:
WAN
LAN
System up Time: 22:11:43
Name:
Routing: IP
ZyNOS F/W Version: V3.50(WC.2)b2 | 02/07/2002
Figure 20-2 Menu 24.1 — System Maintenance — Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status. These fields
are READ-ONLY and are meant to be used for diagnostic purposes. The upper right corner of the screen
shows the time and date according to the format you set in menu 24.10.
FIELD
Port
Status
TxPkts
RxPkts
Cols
20-2
Menu 24.1 - System Maintenance - Status
TxPkts
67
299
Ethernet Address
00:a0:c5:21:8c:a3
00:a0:c5:21:8c:a2
COMMANDS: 1-Drop WAN 9-Reset Counters
Table 20-1 System Maintenance — Status Menu Fields
This is the WAN or the LAN port.
Shows the port speed and duplex setting if you're using Ethernet
Encapsulation and Down (line is down), idle (line (ppp) idle), dial (starting to
trigger a call) and drop (dropping a call) if you're using PPPoE
Encapsulation.
The number of transmitted packets on this port.
The number of received packets on this port.
The number of collisions on this port.
RxPkts Cols
289 0
220 0
IP Address
x.y.155.97
192.168.1.1
Press Command:
DESCRIPTION
23:10:28
Sat. Jan. 01, 2000
Tx B/s Rx B/s
74 64
74 64
IP Mask DHCP
255.255.255.0 Client
255.255.255.0 Server
ESC-Exit
System Information & Diagnosis
Up Time
2:20:56
2:20:54