Viglen Vig644M Manual page 29

 Connecting the Processor Fan Heat Sink Cable
Connect the processor fan heat sink power cable to the 4-pin processor fan header (see
Figure 26). A fan with a 4-pin connector as shown in Figure 26 is recommended.
1. Make sure the four hooks are in the proper position before you install the cooler.
Figure 21: Connecting the processor fan heat sink power cable to the processor fan header
 Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to the
processor installation manual.
28
V1.0 Vig644M Motherboard Manual