Using The Timers - JVC RV-DP200BK Instructions Manual

Using the Timers

TIMER
TIMER
CLOCK TIMER ON/OFF
CLOCK
SLEEP
DOWN
DOWN UP SET
PROGRAM
RANDOM
AUTO
PRESET REPEAT
TUNER
AUX CD TAPE
BAND
FM MODE
REVERSE MODE REW MULTI CONTROL FF
DISPLAY
MID /
TREBLE
SUPER WOOFER
VOLUME
VOLUME
RM-SRVDP100E
REMOTE CONTROL
The timers let you control listening and recording functions auto-
matically.
Setting the Clock
When you supply the power using one of the following ways, the
"CLOCK" indicator blinks and "0:00" appears on the display. You
need to set the clock.
• Plugging the AC power cord into the wall outlet
• Loading 10 batteries into the Unit
• Connecting car battery (DC12V)
Use the Remote Control to set the clock.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within two minutes. Oth-
erwise, the setting is cleared and must be repeated from the
beginning.
CLOCK
DOWN
1. Turn on the System.
2. Press the CLOCK button on the Remote
Control.
The time indication blinks on the display.
3. Press the UP or DOWN button to set the
time.
Press the UP or DOWN button to increase or decrease the time.
Pressing and holding the button will change the time rapidly.
4. Press the SET button.
The selected time is set and the seconds start counting from 0.
Then, the display returns to the original one.
CAUTION: If memory backup batteries are ex-
hausted or not installed, and the AC power cord is
plugged in again after being disconnected, or
power is restored after a power failure, "CLOCK"
indicator will blink on the display. Set the current
time (clock) again.
23
TIMER ON/OFF
SET
SLEEP
UP
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
UP SET
or
TIMER
ON time/OFF time indicator
indicator
TIMER REC
indicator
ON time, OFF time, Source, Volume
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at the
same time every day, except for the Tuner REC timer which is used
to record a broadcast on the tape. It can be cancelled and reactivated
whenever you wish.
The Timer indicator (
Timer you have set is in effect.
Use the Remote Control to set the Daily Timer.
Note: Perform each setting within 30 seconds. Otherwise, set-
ting is cleared and the procedure must be repeated from the
beginning.
1. Turn on the System.
2. Setting the ON time (Example: 12:15).
1. Press the TIMER button on the Remote Control.
The Timer indicator (
the current ON time blinks on the display.
2. Set the ON time by pressing the UP or DOWN button.
Pressing and holding the button will change the time rapidly.
3. Press the SET button.
The current OFF time blinks on the display.
SLEEP indicator
CLOCK indicator
) on the display shows when the Daily
) and "ON" indicator light up and