Adjusting The Voltage Selector; To Know The Locations Of Buttons And Controls - JVC MX-J555V Instructions Manual

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your area
with the voltage selector on the rear of the unit.
CD OPTICAL
DIGITAL
OUTPUT
VIDEO
OUT
STEREO RECEIVER
MODEL NO. MX - J555V
ANTENNA UNIT NO. MX-J555V
AC 110/127/220
/ 230 - 240V
50/60Hz 85W
AM LOOP
AM EXT
VOLTAGE
SELECTOR
220V 110V
FM
FM
(75 )
230V
-240V 127V
AUX
RIGHT LEFT
IN
SUB WOOFER
OUT
OUT
SPEAKERS
RIGHT
LEFT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
Voltage mark
Use a screwdriver to rotate the voltage selector so the voltage number
the voltage mark is pointing at is the same as the voltage where you
are plugging in the unit.
• DO NOT plug in before setting the voltage
selector on the rear of the unit and all
connection procedures are complete.
NOW, you can plug in the unit and other connected
equipment FINALLY!
VOLTAGE
SELECTOR
110V
220V
230V
127V
-240V
VIDEO
OUT
STEREO RECEIVER
MODEL NO. MX - J555V
UNIT NO. MX-J555V
ANTENNA
AC 110/127/220
/ 230 - 240V
50/60Hz 85W
AM LOOP
AM EXT
SELECTOR
220V
FM
FM
(75 )
230V
-240V
AUX
RIGHT LEFT
IN
OUT
RIGHT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
If the wall outlet does not match the AC plug, use the supplied
AC plug adaptor.
When connecting the AC power cord into a wall outlet, the unit
automatically starts display demonstration.
To stop the display demonstration, press any button on the unit or
the remote control.
To start the display demonstration manually
Press and hold DEMO / for more than 2 seconds.
To stop the demonstration, press any button.

To know the locations of Buttons and controls

Please refer to page 28, 29 and 30 for location of the buttons and
controls on your unit. The buttons and controls mentioned in the
steps in this manual have been inserted with numbers i.e 1, 2 (for
unit) or 1, 2 ( for remocon) for your easy reference.
6
VOLTAGE
110V
127V
SUB WOOFER
OUT
SPEAKERS
LEFT
To a wall outlet
DEMO
CANCEL