Connecting Speakers - JVC MX-J555V Instructions Manual

AM antenna
1 2
ANTENNA
AM LOOP
AM EXT
FM
(75 )
AM loop antenna (supplied)
1
Connect the AM loop antenna to the AM LOOP
terminals as illustrated.
2
Turn the AM loop antenna until you have the best
reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire to the
AM EXT terminal and extend it horizontally. (The AM loop antenna
must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
3
Vinyl-covered wire
(not supplied)
FM

Connecting Speakers

You can connect a pair of front speakers and one subwoofer.
To connect front speakers
1
Speaker cord
RIGHT
Right
speaker
1
Press and hold the clamp of the speaker terminal
on the rear of the unit.
2
Insert the end of the speaker cord into the terminal.
Match the polarity of the speaker terminals: Red (+)
to red (+) and black (–) to black (–).
3
Release the finger from the clamp.
IMPORTANT:
Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the rear of
the unit.
4
2, 3
Red
Speaker cord
SPEAKERS
LEFT
Black
Left
speaker
Continued