Siemens Gigaset C450 User Manual page 11

Hide thumbs Also See for Gigaset C450:
Table of Contents

Advertisement

First steps
Initial charging and discharging of
batteries
If the handset is activated, the flashing
battery icon e in the top right of the dis-
play indicates that the batteries are being
charged.
During handset operation, the battery
icon indicates the charge status of the bat-
teries (page 1). The correct charge level
can only be displayed if the batteries are
first fully charged and discharged.
¤
To do this, leave the handset in the
base station or charging cradle with-
out interruption for five hours.
¤
Afterwards, remove the handset from
the base station and do not put it back
again until the batteries are fully dis-
charged.
Please note:
After the first battery charge and discharge
you may replace your handset in its base sta-
tion after every call.
Please note:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and reinsert
them.
u
The batteries may warm up during
charging. This is not dangerous.
u
After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Setting the date and time
Set the date and time so that the correct
date and time can be assigned to incom-
ing calls, and so that the alarm can be
used.
¤
If you have not yet set the date and
time, press the display key
the input field.
10
To change the time, open the input field
with:
v
¤
Date:
Time:
§Save§
Display in idle status
Once the phone is registered and the time
set, the idle display is as shown here
(example). If the answer machine is acti-
vated, the answer machine icon × will
also be displayed in the header:
Your answer machine is set with a stand-
ard announcement.
Your phone is now ready for use.
If you have any queries about using your
phone, please read the tips on trouble-
shooting ("Questions and Answers",
page 53) or contact our customer service
department (Customer Care, page 54).
to open
§Time§
¢
¢
Ð
Date/Time
Change multiple line input:
Enter day, month and year in 6-digit
format.
Enter hours and minutes as 4 digits,
e.g. Q M 5 for 07:15 a.m.
Press the display key
Ð
V
INT 1
15.11.07
07:15
INT
SMS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset c475 ip

Table of Contents