Spark Plugs; Spark Plug Inspection - Polaris Phoenix 200 Owner's Manual

MAINTENANCE

Spark Plugs

Spark Plug Recommendations
Refer to the specifications section beginning on page 96 for the recom-
mended spark plug type and gap for your vehicle. Torque spark plugs to
specification.
NOTICE: Using non-recommended spark plugs can result in serious engine
damage. Always use POLARIS-recommended spark plugs.
Plug Condition
New Spark Plug
Previously Installed Spark Plug

Spark Plug Inspection

Spark plug condition is indicative of engine operation. Check the spark
plug firing end condition after the engine has been warmed up and the
vehicle has been driven at higher speeds. Immediately check the spark
plug for correct color. See page 71.
CAUTION! A hot exhaust system and engine can cause burns. Wear
protective gloves when removing a spark plug for inspection.
1. Remove the spark plug
cap.
2. Using the special wrench
provided in the tool
pouch, rotate the spark
plug counterclockwise to
remove it.
3. Reverse the procedure
for spark plug
installation. Torque to
specification.
70
Torque Specification
9-11 ft. lbs. (12-15 Nm)
17-20 ft. lbs. (23-27 Nm)
Spark Plug Cap