Rear Gearcase Oil; Oil Check - Polaris Phoenix 200 Owner's Manual

Rear Gearcase Oil

Always check and change the rear gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 52.
Maintain the oil level at the bottom of the check plug hole. We recom-
mend the use of POLARIS ATV Angle Drive Fluid. Use of other oils
may result in improper operation of components. See page 98 for the
part numbers of POLARIS products.
Rear Gearcase Oil Recommendations
Gearcase
Rear ATV Angle Drive
Gearcase

Oil Check

1. Position the vehicle on a level
surface.
2. Remove the check plug and view
the oil level.
3. Remove the fill plug. Add the
recommended oil as needed.
4. Reinstall the fill plug. Torque to
specification.
5. Reinstall the check plug. Torque to
specification.
6. Check for leaks.
Oil Change
1. Remove the skid plate.
2. Remove the drain plug. Drain the oil into an appropriate container.
Discard used oil properly.
3. Clean and reinstall the drain plug with a new sealing washer. Torque
to specification.
4. Remove the fill plug and add the recommended gearcase oil.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks.
7. Reinstall the skid plate.
Lubricant Capacity
Fluid
Fill Plug
Torque
4 oz. 25 ft. lbs.
(120 ml) (34 Nm)
Fill Plug
MAINTENANCE
Drain/Check Plug
Torque
18 ft. lbs.
(24 Nm)
Check Plug
61