Disc Player - Panasonic CQ-C1103W Operating Instructions Manual

Disc Player

Disc slot
takes a disc in with the label-side facing up.
Note: The power will be turned on automatically
when a disc is loaded.
( y / 5 ) (Pause/Play)
toggles pause/play in
the player source.
[SRC] (Source)
selects a source.
(SCAN)
toggles on/off the scan play. (Hold it
down for more than 2 seconds.)
Caution
¡ Do not insert a disc when the
¡
Refer to the section of "Notes on Discs".
¡ This unit does not support 8 cm discs.
¡ If you insert an 8 cm disc and cannot eject it, turn ACC of your
car off once and turn it on again, then press [u] (Eject).
1
Press [SRC] to select the Disc Player
source.
2
Select a desired portion.
Track selection
Press [TRACK s] / [TRACK d].
Note: To perform fast forward/reverse, hold down either
of them.
Printed side up
Direct selection buttons [1] to [6]
(7) to (12) (Hold down one of them
for more than 2 seconds.)
select a track directly.
indicator lights. ¡
¡
¡
[TRACK s] [TRACK d]
skip to the previous/next track in the
player mode.
Hold down either of them for fast
reverse/fast forward.
[REP] (Repeat)
toggles on/off the repeat play.
(RANDOM)
toggles on/off the random play. (Hold it
down for more than 2 seconds.)
This unit does not support MP3 and WMA disc play-
back.
This unit does not support CD text display.
Do not insert foreign matter into the disc slot.
Pause
Press [BAND] ( y / 5 ).
Press again to cancel.
Direct track selection
Press a track number button from [1] to [6].
¡ The corresponding track (1–6) starts playing.
Hold down a track number button from [1]
to [6] ((7) to (12)) for more than 2 seconds.
¡ The corresponding track (7–12) starts playing.
[u] (Eject)
ejects the disc.
[DISP] (Display)
switches the informa-
tion on the display.