Storing Your Own Sound Adjustments - JVC KD-SX940 Instructions Manual

Storing your own sound adjustments

You can adjust the sound control modes (BEAT, SOFT, POP: see page 17) to your preference
and store your own adjustments in memory.
1, 3
2
2
1
SOUND
Within
5 seconds
2
2
1
SEL
BBE
Within
5 seconds
3
SOUND
4
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 17.
Call up the sound control mode you want to
adjust.
See page 17 for details.
To adjust the bass or treble level
1 Select "BAS" or "TRE."
SEL
2 Adjust the bass or treble level.
To turn on or off the BBE function
See page 16.
Press and hold SOUND until the sound control
mode you selected flashes on the display.
Your setting is stored in memory.
Within
5 seconds
2
19