Cd Operations; Playing A Cd - JVC KD-SX940 Instructions Manual

Playing a CD

1
2
Notes:
• When a CD is inserted up side down, "PLEASE EJECT" appears on the display.
When you open the control panel by pressing 0, the CD automatically ejects.
• When you play a CD Text, the disc title and performer appear on the display. Then the current track
and elapsed playing time appears on the display. See also "Playing a CD Text" (page 15) and
"Selecting the scroll mode" (page 24).
If a CD Text includes much text information, some may not appear on the display.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
To stop play and eject the CD
Press 0.
CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.
If you change the source to FM, AM, CD changer or external component, the CD play also
stops (without ejecting the CD this time).
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.

CD OPERATIONS

1. Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
2. Close the control panel by hand.
Total track number Total playing time of
of the inserted disc the inserted disc
Open the control panel.
Current track
1
Elapsed
playing time
11