Maintenance Mode #7: Eeprom Data Restore - PFU Limited fi-5530C Maintenance Manual

5-1-8 Maintenance mode #7: EEPROM data restore

When replacing the Panel PCA, the EEPROM data on the Panel PCA shall be moved to the flash memory of the Control PCA.
In this mode, the data is restored from the Control PCA to the Panel PCA.
[How to start]
(1) Select (Maintenance mode #7) by pressing Function button at Screen T04, and then press Scan button. The following
display appears.
Screen T71
Function No.
Display
"o" (down half) blinks.
Confirming whether the data shall be restored or
not.
<Available buttons at Screen T71>
Scan
+ Function button: Returns the data from the Control PCA to the EEPROM on the Panel PCA. During restoring
Send to button: Terminates this mode and returns to Screen T04.
Screen T72
Function No.
Display
"L" (upper half) lights without blinking.
The data is being restored.
Note: While Screen T72 is displayed, no button can function.
Screen T73
Function No.
Display
Displays "o" (upper half) without blinking.
The data has restored normally.
<Available buttons at Screen T73>
Send to button: Terminates this mode and returns to Screen T04.
Screen T74
Function No.
Display
Displays "c" without blinking.
No data exists in the Control PCA.
<Available buttons at Screen T74>
Send to button: Terminates this mode and returns to Screen T04.
05 Nov. 20, 2008 K.Okada T.Anzai
04 July 7, 2008 K.Okada T.Anzai
03 Feb.23, 2007 K.Okada K.Okada
Rev DATE DESIG. CHECK
Aug.19, 2005
DESIG K.Okada CHECK
N
Scanner status
operation, Screen T72 is displayed. If the data restore terminates normally, Screen T73
appears. If no data exists in the Control PCA, Screen T74 appears.
Scanner status
Scanner status
Scanner status
I.Fujioka Refer to Revision Record on page 2.
I.Fujioka Refer to Revision Record on page 2.
T.Anzai Refer to Revision Record on page 2.
APPR. DESCRIPTION
K.Okada
T.Anzai
APPR.
TITLE fi-5530C/fi-5530C2
MAINTENANCE MANUAL
DRAW. P1PA03334-B30X/6
No.
PFU LIMITED
Section 5-1-8
IMAGE SCANNER
CUST.
PAGE
111 138
/