1. Manuals
  2. Brands
  3. PFU Limited Manuals
  4. Scanner
  5. fi-5530C
  6. Maintenance manual

PFU Limited fi-5530C Maintenance Manual

Image scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Maintenance Manual
05
Nov.20, 2008
K.Okada
T.Anzai
04
July 7, 2008
K.Okada
T.Anzai
03
Feb.23 2007
K.Okada
K.Oakda
Rev
DATE
DESIG.
CHECK
Aug.19, 2005
DESIG
K.Okada
CHECK
N
fi-5530C/fi-5530C2
Image Scanner
I.Fujioka
Refer to Revision Record on page 2.
I.Fujioka
Refer to Revision Record on page 2.
T.Anzai
Refer to Revision Record on page 2.
APPR.
DESCRIPTION
K.Okada
T.Anzai
APPR.
03
TITLE
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
DRAW.
P1PA03334-B30X/6
No.
PFU LIMITED
CUST.
PAGE
1
138
/

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the fi-5530C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PFU Limited fi-5530C

Summary of Contents for PFU Limited fi-5530C

  • Page 1 Image Scanner Maintenance Manual Nov.20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23 2007 K.Okada K.Oakda T.Anzai...
  • Page 2 P95: Procedure in Paper feeding test added. November 20, 2008 P114: Emulation mode description changed. The contents of this manual are subject to change without prior notice. All rights reserved, Copyright© PFU LIMITED, 2005-2008 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 3 Preface This manual provides the technical information such as maintenance, troubleshooting procedure and parts replacement procedure for field Engineers on fi-5530C/fi-5530C2 image scanner. This manual should be used for maintenance only. 03 For information that is not contained in this manual, refer to the following manuals:...
  • Page 4 If the descriptions differ from the screens actually displayed, refer to the Acrobat’s “Help”. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 5: Table Of Contents

    3-3-11. Error detection of “No paper on the Chute unit”......................53 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 6 5-1 M ..............................93 AINTENANCE MODE Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 7 ........................138 OLOR ANAGEMENT OLDER Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada T.Anzai...

  • Page 8: Chapter 1 Overview

    This scanner offers high-speed color/monochrome scanning with 600 dpi of optical resolution, up to A3 or 11x17 size. It supports two interfaces, SCSI interface and USB interface, either of which can be used at a time. <Scanner Specifications> Specifications Items fi-5530C fi-5530C2 Scanner type Automatic Document Feeder (ADF) Scanning speed...

  • Page 9: Chute Unit

    * Either SCSI or USB interface connector shall be connected. Only one interface is active at a time. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 10 Section 1-1 Label A (Manufacturing label) (example) fi-5530C fi-5530C2 f i - 5 5 3 0 C 2 Label B (Authorize label) (example) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada...
  • Page 11 . However this does not mean that the scanning of thin paper less than 52 g/m is assured. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 12 Section 1-1 [Outer dimensions] Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada T.Anzai...

  • Page 13: Document Specification

    Following size of document is available. 863.6 (34 in) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 14: Document Quality

    - When scanning wood containing paper, the life of the Pad ASSY and the Pick roller may be shortened compared to the case of scanning woodfree paper. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 15: Capacity Of Adf

    The following graph shows the capacity of ADF with respect to paper weight. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 16: Area Not To Be Perforated

    Feeding trouble of the document might occur, if there is any punched hole in the shaded area in the following figure. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 17: Multi Feed Detection Condition

    - Shape is other than square - Document which edges are colored dark. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 18: Parts Configuration

    Chute unit (ADF paper chute) Stacker unit Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 19: Unpacking The Scanner

    (4) Cushion B (1) Outer box Figure 1-4 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 20: Installing The Scanner

    USB 1.0. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 21 Install the appropriate scanner driver for the application you will use. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 22: Basic Operation

    - Execute a command from the scanner driver. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 23: Loading Documents For Scanning

    “Over Letter/A4 Size” line mark. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 24 6. Start up the scanner application and scan the documents. 03 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 25: Daily Care

    Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 26 Be careful not to damage the sponges beside the rollers. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 27 Note: Close the ADF until it clicks. Paper jams or feeding errors may occur if the ADF is not closed completely. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 28: Replacing The Consumables

    Be careful, the ADF cover may close and pinch your fingers. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 29 6. Reset the Pad counter by referring to Section 1-8-4 Section 5-1-6. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 30: Replacing Pick Roller

    2) Rotate the Pick roller bushing in the direction of the arrow. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 31 Insert new Pick roller aligning the screw on the shaft with the slot in the Pick roller. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 32 3) Attach the sheet guide (Guide P ASSY). Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 33: Resetting Consumable Counters

    The selected counter returns to “0”. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 34: Chapter 2 Description Of Scanner Operation

    1-2. See Section 1-1(4) for detail. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 35: Reading Station

    TOP detects the trailing edge of a document (Page end detection scanning). Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 36: Controller

    PICK Motor BW Motor Figure 2-3A Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 37 5-1-2). (5) Emulation When user replace following scanners with fi-5530C/fi-5530C2, the connection of fi-5530C/fi-5530C2 can fail due to the old PC system. Emulation mode can accommodate the connection for that case. This mode is not open to user. This mode...

  • Page 38: Electric Component Block Diagram

    F2 Motor Fuse F3 5V 3.3V Fuse Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 39: Chapter 3 Troubleshooting

    “C” and then returns to “1”. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 40: Online Self-Diagnostics

    Imprinter check Only when imprinter is installed. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 41: Self-Diagnostics In Maintenance Mode

    *2: Maintenance mode #1 does not detect multi feeding. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 42: Temporary Errors And Alarm Detection Algorithm

    Section 3-3-10. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 43 Remove the document and close the ADF. When the error frequently occurs, refer to Section 3-3-13. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...
  • Page 44 Base unit by referring to Section 4-8. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 45: Alarms

    EEPROM data is not restored to Panel PCA Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...
  • Page 46 When image memory is damaged, irregular image may appear which can be easily detected by visual check. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 47 None “Image transfer error” Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada T.Anzai...

  • Page 48: Troubleshooting

    3-3-23 “EF: Background changeover alarm” 3-3-24 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 49: Scanner Does Not Turn On (No Display On The Operator Panel)

    Refer to Section 4-11. is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 50: Resolution Or Gradation Of Scanned Image Is Unsatisfactory

    Refer to Section 4-11. is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 51: Too Much Jitter On Scanned Image With Adf Scanning

    Base unit and see whether the error is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 52: Scan Magnification Factor Abnormal With Adf Scanning

    Refer to Section 4-11. is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 53: When Calibrating White Of Scanned Image

    (Refer to Section 4-9-7.) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 54: Error Detection Of "U4: Adf Cover Open

    (Refer to Section 4-9-5, 4-10-1) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 55: E2 Or E3: Optical Alarm

    E3 (ADF back): Refer to Section 4-9-3. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 56: E4: Motor Fuse Blown

    Section 4-11 for replacement. is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 57: Reserved)

    Section 4-11 for replacement. error is resolved Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 58: E9: Image Memory Alarm

    Section 4-11 for replacement. error is resolved. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 59: Ef: Background Changeover Alarm

    Section 4-9-3 for upper Optical unit replacement. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 60: Chapter 4 Disassembly / Assembly

    Push the upper place of the Latch when you remove those parts. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 61: Maintenance

    • Glass of Upper Frame ASSY (Refer to Section 4-3-4) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 62: Cleaning

    3) After cleaning, mount the removed parts. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 63: Maintenance Tool

    (Note in Section 4-7-5) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 64: Non Disassembly Parts

    CCD board fixing screw Mirrors inside 4-6 (Reserved) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 65: Removing / Mounting Chute Unit, Stacker Unit, Pcb Unit And Covers

    Follow the above procedure in reverse. Scanner Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 66: Removing/Mounting The Pcb Unit

    Gray wire, Small Gray wire, large Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 67: Removing/Mounting The Rear Cover

    Claw Claw Square hole of chassis Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 68: Removing/Mounting The Upper Cover

    Also, when attaching Upper cover, remove this adhesive tape. Adhesive tape Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...
  • Page 69 Upper cover and shaft Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 70: Removing/Mounting The Guide A Assy

    Claw B Guide A ASSY Claw A Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 71: Replacing The Upper Unit And The Base Unit

    Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 72 After replacing the Base unit, reset the Pick Counter as the Base unit includes the Pick roller. (Refer to Section 5-1-6) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 73: Replacing The Parts In The Upper Unit

    Upper cover, the Panel PCA is lifted causing power button to be turned ON. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 74: Replacing The Inverter Sr

    Follow the removing procedure in reverse. Makes sure the cables are placed through the slots in two locations as shown in the figure above. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 75: Replacing The Optical Unit, Opt Unit With Cable B And Ccd Cable B

    Slot A Hooks Optical unit Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...
  • Page 76 Magnification adjustment (Refer to Section 5-1-3) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 77: Replacing The Lamp Sr (For Adf Backside)

    Magnification adjustment (Refer to Section 5-1-3) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 78: Replacing The Us Sensor (In Upper Unit)

    (2) After mounting the US sensor, run the Sensor testing by the Maintenance mode #1 described in Section 5-1-2. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 79: Replacing The Lf Motor

    When securing the screws of the motor, pull the motor up to apply the belt tension so that the tension becomes the value shown in the following figure. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 80: Replacing Sensor Em / Sensor Pick / Sensor Top

    Glass Heading the fulcrum shaft Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...
  • Page 81 5-1-2) and adjust the offset by Maintenance mode (Section 5-1-4). Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 82: Replacing The Upper Frame Assy

    (3) Check the sensor performance by Maintenance mode #1 in Section 5-1-2. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 83: Replacing The Parts In The Base Unit

    (2) After mounting the US sensor, run the Sensor testing by the Maintenance mode #1 described in Section 5-1-2. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 84: Replacing The Hk Ring Sr

    Follow the removing procedure in reverse. If the glasses in ADF are dirty, clean them by a dry lint-free cloth. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 85: Replacing The Dust Cover

    Lamp SR, Inverter SR, US sensor, US PCA, HK Ring SR Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 86 Cable band U-shape slot of frame Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 87: Replacing The Inverter Sr (For Front Side Scanning)

    Follow the removing procedure in reverse. The cable from the Lamp SR shall be routed as shown in the figure above. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 88: Replacing The Lamp Sr (For Adf Front)

    ■ Magnification adjustment (Section 5-1-3) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 89: Replacing The Optical Unit, Opt Unit With Cable F, Ccd Cable F

    ■ Magnification adjustment (Section 5-1-3) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 90: Replacing The Pick Motor

    Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 91: Replacing The Bw Motor

    Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 92: Replacing The Control Pca

    Follow the removing procedure in reverse. When connecting the connectors, refer to the notice in Section 4-7-3. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 93: Chapter 5 Adjustment/Settings

    Mode #6: Miscellaneous information display Mode #7: EEPROM data restore Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...
  • Page 94 Select one Maintenance mode and press the Scan button. The scanner activates the selected Maintenance mode. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 95: Maintenance Mode #1: Paper Feeding Test / Sensor Test / Background Changeover Test

    Default (Screen T11) Imprinting Screen T12 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...
  • Page 96 ADF paper chute (Chute unit). Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 97: Maintenance Mode #2: Main Scanning / Sub-Scanning Magnification Adjustment

    Press Send to button during operation. The operation stops and the Maintenance mode selection Screen T04 appears. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 98 Send to button: Terminates this mode and returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 99 Send to button: Terminates this mode and returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 100 Figure 5-1-3. Test sheet for the magnification/offset adjustment Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 101: Maintenance Mode #3 : Offset Adjustment

    Press Send to button during operation. The operation stops and the Maintenance mode selection Screen (T04) appears. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 102 Send to button: Terminates this mode and returns to Screen T04 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 103 Use the same sheet as used for the magnification adjustment. See Section 5-1-3, Figure 5-1-3. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 104: Maintenance Mode #4: White Level Adjustment

    Note: After reading the white level adjustment sheet, it takes approx. 10 seconds for the scanner to calculate the level adjustment and close adjustment. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...
  • Page 105 Send to button: Terminates this mode and returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 106 Send to button: Terminates this mode and return to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 107: Maintenance Mode #5: Counter Display And Reset

    When Roller kit is replaced, this counter shall be reset. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.
  • Page 108 Send to button: Terminates this mode and returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 109: Maintenance Mode #6: Miscellaneous Information Display

    “6” “2” “4” “5” Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada T.Anzai...
  • Page 110 Press Send to button. The display returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 111: Maintenance Mode #7: Eeprom Data Restore

    Send to button: Terminates this mode and returns to Screen T04. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 112: Saving Eeprom Data

    So Restore EEPROM data by the procedure in Section 5-1-8. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 113: Emulation Mode

    - fi-4120C - fi-4120C2 - M3096GX - M3093GX Sensor PICK Sensor EM Models supported by fi-5530C2 - fi-4530C - fi-5530C 03 Sensor TOP - fi-4120C - fi-4120C2 - fi-5120C 03 - M3096GX - M3093GX (1)How to activate Emulation mode Open the cover. Press Sensor PICK and Function button, and then press and release Power button. Keep pressing Sensor PICK and Function button until scanner shows Screen B on the panel.
  • Page 114 Operating Emulation mode (1) Press Scan button while is displayed on the operator panel. The screen to select the scanner model appears. The number in Function No. Display and its scanner model to be emulated are as follows. <fi-5530C> Function Model Comment No.

  • Page 115: Title Image Scanner

    <Available buttons at Screen E14> Send to button: Returns to emulation initial display. Note A: The display of the scanner model of emulation is as follows. Scanner model Display method fi-5530C “5530” is displayed in the following order. “-” “5” “5”...

  • Page 116: Chapter 6 Maintenance Parts

    Chapter 6 Chapter 6 Maintenance parts Quantity 03 Replacement Description Part number Reference Remarks procedure fi-5530C fi-5530C2 BASE UNIT PA03334-D971 DUST COVER PA03334-D975 4-10-3 HK RING SR PA03334-F912 4-10-2 4 pieces per set INVERTER SR PA03334-F916 4-10-4 PA03334-F903 LAMP SR...

  • Page 117: Base Unit

    Dust Cover PA03334-D975 Figure 6-2 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 118: Base Unit 6-2. Dust Cover 6-3. Hk Ring Sr

    Inverter SR PA03334-F916 Figure 6-4 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 119: Lamp Lsr

    US Sensor 6-13 PA03334-F902 Figure 6-6 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 120: 6-7. Us Pca

    Optical Unit With Cable F PA03334-D925 Figure 6-8 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 121: Ccd Cable F

    Optical Unit 6-10 PA03334-D929 Figure 6-10 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 122: Optical Unit 6-11. Pick Motor 6-12. Guidep Assy

    Guide P ASSY 6-12 PA03334-D913 Figure 6-12 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 123: Bw Motor

    Figures BW Motor 6-13 PA03334-F919 Figure 6-13 6-14. Upper Unit Description Remarks Figure Parts No. 03 PA03334-D981 (fi-5530C) For Europe and North America PA03334-D985 (fi-5530C2) Upper Unit Note: Panel PCA is excluded. 6-14 PA03334-D987 (fi-5530C) For China PA03334-D988 (fi-5530C2) This unit includes a lamp that contains mercury.

  • Page 124: Upper Unit 6-15. Upper Frame Assy

    6-16 PA03334-F913 02 Figure 6-16 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 125: Otor 6-17. Sensor Em

    Sensor PICK 6-18 PA03334-F922 Figure 6-18 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 126: Sensor Top

    Optical Unit With Cable B 6-20 PA03334-D927 Figure 6-20 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 127: Ccd Cableb

    Panel PCA 6-22 PA03334-K907 Figure 6-22 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 128: Control Pca

    Section 6-23 6-23. Control PCA Description Remarks Figures Parts No. 03 PA03334-K905 (fi-5530C) Control PCA 6-23 PA03334-K915 (fi-5530C2) Figure 6-23 6-24. Stacker Unit Description Parts No. Remarks Figure Stacker Unit 6-24 PA03334-D944 Figure 6-24 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 129: Chute Unit

    Remarks Figures Chute Unit 6-25 PA03334-D943 Figure 6-25 6-26. AC Adapter Description Remarks Figures Parts No. 03 PA03334-K910 (fi-5530C) AC Adapter 6-26 PA03334-K920 (fi-5530C2) Figure 6-26 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE...

  • Page 130: Ac Cordset U

    For Europe PA63098-1831 Figure 6-28 Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada K.Okada...

  • Page 131: Appendix A Definition Of Scanner And Camera Properties

    Appendix A Definition of Scanner and Camera Properties The following describes scanner driver setting that is excerpted from TWAIN driver (ST1 version) manual and modified for fi-5530C/fi-5530C2. 03 Displaying Scanner and Camera Properties Double-click the [Scanner and Camera] icon on the [Control Panel] to display the corresponding Properties dialog box.

  • Page 132: Events Tab

    - Take no action: Nothing starts even if the event occurs. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 133: Diagnostic Tab

    (The example screen is for fi-4110CU) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007 K.Okada...

  • Page 134: Device Information Tab

    Then, select this tab folder again to display the contents. (The example screen is for fi-4530C) Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 135: Device Setup Tab

    To set the consumables counter to zero after replacing consumables, click the [Clear] button. This operation can be executed using the operation panel of the device. <Counters supported by fi-5530C/fi-5530C2> Total number of sheets ever scanned (ADF): Incremented after scanning 10 sheets...

  • Page 136: Power Saving

    Specify when the lamp turns off. This is the elapsed time after a scan is complete. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

  • Page 137: Fi-5530C/Fi-5530C2 Maintenance Manual P1Pa03334-B30X/6

    (Power button will no longer work). Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. MAINTENANCE MANUAL Feb.23, 2007...

  • Page 138: About Tab

    "sRGB Color Space Profile.icm" is the default driver assigned to this driver. Nov. 20, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2. TITLE fi-5530C/fi-5530C2 IMAGE SCANNER July 7, 2008 K.Okada T.Anzai I.Fujioka Refer to Revision Record on page 2.

This manual is also suitable for:

Fi-5530c2

Table of Contents