Climate Control - Fiat Ulysse Owner's Handbook Manual

CLIMATE CONTROL (cooling)
Proceed as follows:
- turn the slider pointer B to the blue
section;
- press button F to turn the climate
control compressor on and button G
to turn on inside air recirculation;
- turn the slider pointer A to the re-
quired speed.
• fan speed setting: this is possi-
ble by turning slider A.
• air distribution selection: this is
possible by this is possible by turning
slider E.
Air can be distributed in five
ways: ventilation (front), bilevel
(front/feet), feet, windscreen/feet,
windscreen (MAX-DEF).
• compressor on/off: if the com-
pressor is turned off by pressing but-
ton N when the led is lit, the related
led will go off; if the same button is
pressed when the led is switched off,
the compressor (on/off) is on.
• MAX-DEF on: this is possible by
pressing button D and window
demisting will be quickly reached.
• rear heated window on: this is
possible by pressing button C, and the
related led comes on. In this way the
rear window electrical resistances are
activated to heat and demist the rear
window. To stop it, press the button
again and the related led will go off.
Anyway, the rear heated window
works for a limited time and turns off
automatically.
Be careful not to dam-
age the rear heated win-
dow resistances when
cleaning it from inside.
• recirculation on: when button G
is pressed it is possible to select the
following travelling conditions: closed
recirculation (relative led on), air com-
ing from outside (led off) recirculation
open, or having the system automatic
control on (led off even if activated).
67