Table of Contents
Advertisement
DISMANTLING THE SECOND
AND THIRD ROW SEATS
To dismantle:
– operate release lever C-fig. 33 and
guide the seat back until the "table"
position is reached; turn the tipped
seat again until the "wallet" position is
reached fig. 36;
– take belt E and pull it upwards then
remove the whole seat from its hous-
ings on the floor runners.
Reverse the above mentioned pro-
cedure to reassemble the seat.
Before starting off again,
make sure that the seats
are facing the front of the
vehicle and are properly fastened
to their anchorage points. The
seat belts can only be used effec-
tively in this position.
Make sure the anchor-
age holes are always
clean; if debris has got in-
to them it interferes with the
seats being locked securely into
place.
fig. 36
THIRD ROW BENCH SEAT
Moving the seat backwards
or forwards fig. 37
Lift lever A and push the seat back-
wards or forwards.
It is possible to widen the luggage
compartment capacity from the out-
side by pulling handle B and pushing
the bench forwards.
F0B0411b
fig. 37
F0B0286b
29
Advertisement
Table of Contents
