External Component Operations; Playing An External Component - JVC KD-SH9105 Instructions Manual

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect an external components to the
LINE IN plugs on the rear.
• If you cannot select "LINE IN" as the source,
change the "Line In" setting to "On." (See pages 40
and 42.)
1
Select the external component
(LINE IN).
SRC
If you have assigned a different name to the
external component, it will appear.
2
Turn on the connected component
and start playing the source.
54
D
SRC
DISP
ATT
SEL
Each time you press the
button, the source changes
as described on page 7.
When you select a source,
the power automatically
comes on.
1 2 3 4 5
3
Adjust the volume.
ATT
4
Select the DSP mode and sound
mode as you want.
• For the DSP modes, see page 25.
• For the sound (iEQ) modes, see page 28.
Note:
When the source is "LINE IN," the DISP (D) button
will not work.
BBE
MODE
6 M