Table of Contents
Advertisement
6.3.7
(continued)
2.
Clean the area thoroughly with a white cloth saturated
with acetone.
3.
Select the layers of patching materials (mat
and woven roving, or mat only), according to
the type of fiber glass visible on the inside
of the structure. (see Section 6.3, Procedure C,
Step 2).
9.
Patch the area as instructed in Section 6.3, Procedures
D through G.
5.
Complete the repair by finishing the surface as instructed
in Section 6.3, Procedure H.
IMPORTANT
spray finishing the surface is necessary when the repaired area can be
seen from inside the structure, such as a boat or shower stall.
SECTION 6
Page 30
Hide quick links:
Advertisement
Table of Contents
