Turn Signal Lamps - Cadillac SRX 2010 Owner's Manual

Hide thumbs Also See for SRX 2010:

Table of Contents

Vehicle Care

Turn Signal Lamps

To replace one of these bulbs:

1. Open the liftgate. See Liftgate

(Manual) on page 1 13 or

Liftgate (Power) on page 1 14.

B. Taillamp Cover

2. Pull on push pin (A) to release

the taillamp cover (B).

3. Remove the taillamp cover from

the lamp assembly by pulling

rearward from the top to

unfasten from snap tabs.

4. Remove the two screws from the

taillamp assembly.

5. Pull the taillamp assembly

straight back to remove.

A. Turn Signal Lamp

B. Back-Up Bulb/Socket

6. Turn the turn signal lamp (A)

bulb socket counterclockwise to

remove it from the taillamp

7. Pull the bulb straight out from

Table of Contents