Cadillac SRX 2010 Owner's Manual page 335

9-30 Vehicle Care
2. Slide cover towards wiper blade
tip to unhook from blade
assembly.
3. Remove the cover.
4. After wiper blade replacement,
ensure that cover hook slides
into slot in blade assembly.
5. Snap cover down to secure.
To remove the wiper blade:
1. Lift the wiper arm away from the
windshield.
A. Wiper Arm
B. Release Lever
C. Blade Assembly
2. Push the release lever (B) to
disengage the hook and push
the wiper arm (A) out of the
blade assembly (C).
3. Push the new blade assembly
securely on the wiper arm until
the release lever clicks into
place.
4. Replace wiper cover.