Table of Contents
Advertisement
When reinstalling the wheel cover
or center cap on the full-size tire,
tighten all five plastic caps hand
snug with the aid of the wheel
wrench and tighten them with
the wheel wrench an additional
one quarter of a turn.
Notice: Wheel covers will not fit
on your vehicle's compact spare.
If you try to put a wheel cover on
the compact spare, the cover or
the spare could be damaged.
Storing a Flat or Spare Tire
and Tools
WARNING
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
To store the flat or spare tire and
tools:
1. Open the liftgate. See Liftgate
(Manual) on page 1 13 or
Liftgate (Power) on page 1 14
for more information.
2. Put back all tools as they were
stored in the rear storage
compartment and put the
compartment cover back on. For
more information, see Storing
the Compact Spare Tire and
Tools next in this section.
3. Install the cargo cover. For more
information, see Cargo
Management System on
page 3 5.
4. Place the tire, lying flat, in the
rear storage compartment.
Vehicle Care
5. Attach the strap to the cargo
tie-down in the rear of the
vehicle.
9-99
Advertisement
Chapters
Table of Contents
