8.2 Flushing toilet
Preparing the toilet
• Open the Thetford door and pull the holding bar up to remove
the excrement tank.
The excrement tank can only be removed when the bolt
is closed.
• Pull out the tank as far as possible, keeping it level.
• Slightly tip the excrement tank and then pull it out comple-
tely.
• Place it in an upright vertical position.
• Turn the emptying support to an upward position.
You may be able to avoid the use of sanitary liquids by
installing an activated carbon filter system (sold as an
accessory)!
Use sanitary liquids very sparingly. An overdose is no gu-
arantee of preventing odours!
• Fill the excrement tank with the correct amount of sanitary
liquid.
• Then add enough water to completely cover the bottom of
the excrement tank.
• Return the emptying support to its original position.
Water
08-4