Comparisons Of Cutting Time - Hitachi CR 13V2 Technical Data And Service Manual

3. Comparisons of cutting time

The following test data should be used only for reference purposes since cutting time may vary depending
on such operating conditions as using the cutting function, the pressing force applied, and type of blade
being used. The graph indicates the time (in sec.) needed to cut a piece of each material.
(1) Cutting steel pipe
HITACHI genuine blade
No. 103 for cutting steel pipe
CR 13V2 CR13V2
CR 13V
CR13V
D
B1
M
B2
0
Steel pipe less than 42 mm (1.65") in inner diameter
and 3.2-mm (0.13") thick
Pressing force of about 5 kgf (11 lbs.)
Cutting speed
5 10
Cutting time (sec./cut)
-6-
15 20 25