Registering A Unit; Additional Handsets; Additional Base Units - Panasonic KX-PRS110FX Operating Instructions Manual

Note:
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1
MMenuN (right soft key) a
2
To see the entries on the selected date,
press MOKN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: "Detail" a MOKN
Editing an entry
1
MMenuN (right soft key) a
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Edit" a MOKN
4
Edit the date if necessary. a MOKN
5
Edit the time if necessary. a MOKN
6
Edit the text memo if necessary (30
characters max.). a MOKN
7
MbN: Select the desired alarm tone. a
MOKN 2 times a M
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
MMenuN (right soft key) a
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Erase" a MOKN
4
MbN: "Yes" a MOKN a M
Erasing all entries
1
MMenuN (right soft key) a
2
MListN a MMenuN
3
MbN: "Erase All" a MOKN
4
MbN: "Yes" a MOKN
PRS110FX(en)_0725_ver020.pdf
5

Registering a unit

Operating additional units

Additional handsets

a MOKN
Up to 6 handsets can be registered to a single
base unit.
Important:
R The additional handset model
a MOKN

Additional base units

Handsets can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when "Auto" is selected on
base unit (page 32), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a "radio cell".
N
Note:
R Calls are disconnected when the handset
Registering a handset to a base
unit
a MOKN
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
N
near the base unit), re-register the handset.
1
a MOKN
2
3
31
Programming
MbN: "Yes" a MOKN a M
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
moves from one radio cell to another.
is displayed even when the handset is
Handset:
MMenuN (right soft key) #130
MbN: Select a base unit number. a MOKN
R This number is used by the handset as
a reference only.
Base unit:
Press and hold M N for about 5 seconds.
2013/07/25 9:56:13
N
31