Normal Starting Procedure - Engine; Starting Procedure - Engine Manifold Air; Temperature 0°F To 66°F (-18°C To 19°C) - Dodge Ram Truck 2011 Owner's Manual

48 STARTING AND OPERATING
CAUTION!
Do not crank engine for more than 15 seconds at a
time or starter motor damage may result. Turn the
ignition switch to the OFF position and wait at least
two minutes for the starter to cool before repeating
start procedure.
5. When the engine starts, release the key fob.
6. Check to see that there is oil pressure.
7. Release the parking brake.
Starting Procedure – Engine Manifold Air
Temperature 0°F to 66°F (–18°C to 19°C)
NOTE: The temperature displayed in the Electronic
Vehicle Information Center (EVIC) does not necessarily
reflect the engine manifold air temperature. Refer to
"Electronic Vehicle Information Center (EVIC)" in "Un-
derstanding Your Instrument Panel" for further informa-
tion. When engine temperatures fall below 66°F (19°C)
the "Wait To Start Light" will remain on indicating the
intake manifold heater system is active.
Follow the steps in the "Normal Starting" procedure
except:
1. The "Wait To Start Light" will remain on for a period
of time (length of time depends on engine temperature).
CAUTION!
If the "Water in Fuel Indicator Light" remains on, DO
NOT START engine before you drain the water from
the fuel filter to avoid engine damage. Refer to
"Maintenance Procedures/Draining Fuel/Water Sepa-
rator Filter" in "Maintaining Your Vehicle" for fur-
ther information.