Ada Suite 7.1 HD Installation Manual page 48

Home theater controller
Table of Contents

Advertisement

THX Ultra 2 Music
FF, 03, 00, 10, 38, 4B, FF
Downmix Cinema
FF, 03, 00, 14, 06, 1D, FF
Downmix Club
FF, 03, 00, 14, 07, 1E, FF
Downmix Hall
FF, 03, 00, 14, 08, 1F, FF
Downmix Arena
FF, 03, 00, 14, 09, 20, FF
Downmix Cathedral
FF, 03, 00, 14, 0A, 21, FF
Downmix Quad Reverb
FF, 03, 00, 14, 0B, 22, FF
Stereo Enhance Attn Up
FF, 03, 00, 01, E2, E6, FF
Stereo Enhance Attn Down
FF, 03, 00, 01, E3, E7, FF
Stereo Enhance Delay Up
FF, 03, 00, 01, E4, E8, FF
Stereo Enhance Delay Down FF, 03, 00, 01, E5, E9, FF
Mono Enhance Attn Up
FF, 03, 00, 01, E6, EA, FF
Mono Enhance Attn Down
FF, 03, 00, 01, E7, EB, FF
Mono Enhance Delay Up
FF, 03, 00, 01, E8, EC, FF Increments Delay for Mono Enhance Mode
Mono Enhance Delay Down FF, 03, 00, 01, E9, ED, FF Decrements Delay for Mono Enhance Mode
Dynamic Range @ Max
FF, 03, 00, 01, 49, 4D, FF
Dynamic Range @ Mid
FF, 03, 00, 01, 4A, 4E, FF
Dynamic Range @ Min
FF, 03, 00, 01, 4B, 4F, FF
Center Width Up
FF, 03, 00, 01, F0, F4, FF
Center Width Down
FF, 03, 00, 01, F1, F5, FF
Panorama On
FF, 03, 00, 01, EE, F2, FF
Panorama Off
FF, 03, 00, 01, EF, F3, FF
Dimension Control Up
FF, 03, 00, 01, EC, F0, FF
Dimension Control Down
FF, 03, 00, 01, ED, F1,FF
Surround All Pass
FF, 03, 00, 01, F4, F8, FF
Surround LPF @ 7kHz
FF, 03, 00, 01, F5, F9, FF
Surround HPF + Shelf
FF, 03, 00, 01, F6, FA, FF
Surround Delay On
FF, 03, 00, 01, FC, 00, FF
Surround Delay Off
FF, 03, 00, 01, FD, 01, FF
RS Polarity Inverse On
FF, 03, 00, 01, F7, FB, FF
RS Polarity Inverse Off
FF, 03, 00, 01, F8, FC, FF
Matrix Coef 0
FF, 03, 00, 01, F9, FD, FF
Matrix Coef 1
FF, 03, 00, 01, FA, FD,FF
Matrix Coef 2
FF, 03, 00, 01, FB, FD, FF Sets Matrix Coefficient at 2 for Pro Logic II Music and Custom Modes Only
Auto Balance On
FF, 03, 00, 01, F2, F6, FF
Auto Balance Off
FF, 03, 00, 01, F3, F7, FF
Re-Equalization On
FF, 03, 00, 01, 77, 7B, FF
Re-Equalization Off
FF, 03, 00, 01, 78, 7C, FF
Decorrelation On
FF, 03, 00, 01, 7B, 7F, FF
Decorrelation Off
FF, 03, 00, 01, 7C, 80, FF
Timbre Match On
FF, 03, 00, 01, 79, 7D, FF
Timbre Match Off
FF, 03, 00, 01, 7A, 7E, FF
Command Name
Hex Command
Send Address
FF, 03, 07, 82, 00, 8C, FF
Update All Settings
FF, 03, 00, 00, 0D, 10, FF
Update Turn on Preset/Max FF, 03, 00, 01, DC, E0, FF Requests an update of the current Turn On Input Pre-set and Maximum Volume setting
Update Input
FF, 03, 00, 10, 84, 97 FF
Update Record
FF, 03, 00, 10, A4, B7 FF
Update Volume Master
FF, 03, 00, 01, 7F, 83, FF
Update Vol/Mst/Fmt/Mode
FF, 03, 00, 01, 81, 85, FF
Update Fmt/Mode/Dyn Rng FF, 03, 00, 01, 80, 84, FF
Update Re-Eq/Tim/Decorr
FF, 03, 00, 01, 76, 7A, FF
Update Pro-Logic II Informtn FF, 03, 00, 01, EB, EF, FF
Update Tone Group A
FF, 03, 00, 01, A2, A6, FF
Update Tone Groups B
FF, 03, 00, 01, B3, B7, FF
Update Speaker Size
FF, 03, 00, 01, 88, 84, FF
Update Balance
FF, 03, 00, 01, 82, 86, FF
Update Delays
FF, 03, 00, 01, 83, 87, FF
Update ASA
FF, 03, 00, 01, 4E, 52, FF
Version Request
FF, 03, 00, 00, 0E, 11, FF
Installer Default Store
FF, 03, 00, 13, 81, 97, FF
Installer Default Recall
FF, 03, 00, 13, 80, 96, FF
Factory Default Recall
FF, 03, 00, 10, FC, 0F, FF
Page 48
Direct Mode Selection-THX Ultra Mode Optimized for Music (Multi-Channel Mode)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Direct Mode Selection (Multi-Channel Mode - New for 7.1 HD)
Increments Gain for Stereo Enhance Mode
Decrements Gain for Stereo Enhance Mode
Increments Delay for Stereo Enhance Mode
Decrements Delay for Stereo Enhance Mode
Increments Gain for Mono Enhance Mode
Decrements Gain for Mono Enhance Mode
Sets Dynamic Range at Maximum for non THX modes only
Sets Dynamic Range at the Middle for non THX modes only
Sets Dynamic Range at Minimum for non THX modes only
Increments Center channel width for Pro Logic II Music and Custom Modes Only
Decrements Center channel width for Pro Logic II Music and Custom Modes Only
Turns on Panorama enhancement for Pro Logic II Music and Custom Modes Only
Turns off Panorama enhancement for Pro Logic II Music and Custom Modes Only
Increments Dimension Control for Pro Logic II Music and Custom Modes Only
Decrements Dimension Control for Pro Logic II Music and Custom Modes Only
Sets Frequency Pass Filter for Surrounds for Pro Logic II Music and Custom Modes Only
Sets Frequency Pass Filter for Surrounds for Pro Logic II Music and Custom Modes Only
Sets Frequency Pass Filter for Surrounds for Pro Logic II Music and Custom Modes Only
Turns on surround delay for Pro Logic II Music and Custom Modes Only
Turns off surround delay for Pro Logic II Music and Custom Modes Only
Turns on RS Polarity Inverse for Pro Logic II Music and Custom Modes Only
Turns off RS Polarity Inverse for Pro Logic II Music and Custom Modes Only
Sets Matrix Coefficient at 0 for Pro Logic II Music and Custom Modes Only
Sets Matrix Coefficient at 1 for Pro Logic II Music and Custom Modes Only
Turns on Auto Balance for Pro Logic II Music and Custom Modes Only
Turns off Auto Balance for Pro Logic II Music and Custom Modes Only
Turns Re-Equalization On (for Non THX Modes Only)
Turns Re-Equalization Off (for Non THX Modes Only)
Turns Decorrelation On (for Non THX Modes Only)
Turns Decorrelation Off (for Non THX Modes Only)
Turns Timbre Match On (for Non THX Modes Only)
Turns Timbre Match Off (for Non THX Modes Only)
System and Specific Information Update Commands
Sends the selected unit address from the PCOS Program to the unit
Requests an update of all possible settings in the unit
Requests an update of the currently selected input
Requests an update of the currently selected record input
Requests an update of current master volume setting (in dB)
Requests an update of the current master volume, decoding format and playback mode
Requests an update of the current decoding format, playback mode & dynamic range setting
Requests an update of the current Re-EQ, Timbre Match and Decorrelation settings
Requests an update of all Pro Logic II information (only if in Pro Logic II mode)
Requests an update of all current Tone Group A Settings
Requests an update of all current Tone Group B Settings
Requests an update of all current Speaker size settings
Requests an update of all current speaker balance settings
Requests an update of all current speaker delay settings
Requests an update of all current Boundary Gain settings
Requests an update of all current revs for the unit and chips
Stores all changes/set-ups/settings as the Installer Default
Recalls all changes/set-ups/settings as stored above as the Installer Default
Returns all settings/set-ups to the ADA out of box default recalls

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents