Desa (V)GM36 Installation Instructions Manual page 23

INSTALLING BRICKS
The brick housing panels are already installed in the firebox. Each housing is stamped with a letter (full size bricks are not stamped).
These letters will help identify the brick when installing. It is important to install these bricks exactly as instructed.
Press the brick firmly into the brick housing until it snaps. The groove line on the side of the brick will come in contact with the flange on
the brick housing. This secures the brick into the housing.
BRICK
STAMPED LETTER
LOCATION
FLANGES
BRICK HOUSING
INSTALLING BRICK "S"
Use brick "S" if an optional gas line is installed. Mount brick "S" as shown. It is important that the knockout hole is in its proper location.
The knockout hole on brick "S" should align with the hole on the brick housing.
LEFT PANEL
RIGHT PANEL
FULL FULL
D B
FULL FULL
B D
C A
A
C
S
S
- -
21
For more information, visit www.desatech.com