Conair GS23 Quick Start Manual page 2

fabric steamer
with D U A L
OpeRAtinG inStRUCtiOnS
1. Plug the unit into the electrical outlet.
2. The power light (A) will light up (red). Allow
one or two minutes for the unit to warm up.
The appliance is ready to use when the
ready light goes on (green) (B).
3. Holding the steam jets away from you and anyone else
in the room, engage the trigger (C). Steam should now be
released from the steam jets. To have continuous steam,
just move switch down (C) so you will have continuous
steam without having to hold the trigger. Always have
steam facing away from you or anyone in the room.
4. When first using the device, test on an old cloth, as there
may be sediment left from the manufacturing process or
transportation.
5. On the back of the steamer there is a sliding switch for high
and low settings (D). High is for heavier and badly wrinkled
fabric and provides faster, hotter, less visible steam. Low setting
should be used for delicate fabrics like silk, in combination with
soft cushion brush attachment.
6. To stop the flow of steam, release the trigger (C) or move the
switch upward if on constant steam.
7. Unplug the device when it is not in use.
FiLLinG inStRUCtiOnS
1. Make sure unit is unplugged.
2. Place the unit on its back on a flat and stable surface.
3. While holding the water reservoir with one hand, move the
release switch up toward the steam head nozzle.
4. Pull the reservoir out, away from the body.
5. Turn the reservoir over, revealing the rubber inlet cover.
6. Open the inlet cover and fill the reservoir with everyday tap
water (filtered water may reduce hard water problems).
7. Close the inlet cover and return the reservoir to its place,
making sure that it is secure.
For information on any Conair product call
gs23x_13pa143391_quickstart_guide_comp.indd 2
H E A T
1-800-3-COnAiR
™
E
F
C
ADDinG AttACHmentS
1. Simply take attachment out of box and
place top portion of attachment
to top of steamer (E) and snap on lower
opening below steamer nozzle (F).
or visit us on the web at
A
B
D
www.conair.com
5/22/13 3:49 PM