Conair GS51 - Fabric Steamer Manual

Table of Contents

Contents

1 GETTING TO KNOW YOUR DEVICE
2 OPERATING INSTRUCTIONS
- 2.1 USING 2-IN-1 ATTACHMENT
- 2.2 AUTO SHUTOFF FEATURE
3 IMPORTANT SAFETY INSTRUCTIONS
- 3.1 FILLING INSTRUCTIONS
4 CONAIR GARMENT STEAMING ACCESSORIES
5 STEAMING TIPS FOR PRESSING
6 Documents / Resources
- 6.1 Download manual

GETTING TO KNOW YOUR DEVICE

OPERATING INSTRUCTIONS

Fill water reservoir with preferably distilled water (See Filling Instructions.)
Plug the unit into the electrical outlet.
Press the ON/OFF button to turn steamer on.
The blue and red READY light will illuminateand begin blinking. Allow 35 seconds for the unit to warm up. The appliance is ready to use when the red light stops blinking and remains solid. NOTE: Before first use or when the unit has not been used for a long period of time, it will be necessary to prime (i.e., fill with water) the internal tank while the steamer prepares to steam. You may hear a small tapping noise during the heat-up process; this is normal.
Your steamer has 3 options for steam: To choose steam setting press the +/- Mode button. One light indicates Low mode for delicate fabrics or for freshening lightly wrinkled garments. Two lights indicate Medium mode for everyday cottons and polyester fabrics with moderate wrinkles. Three lights indicate High Turbo mode for thicker fabrics and heavily wrinkled fabrics.
Pointing the steam jets away from you, andanyone else in the room, press the Steam button to release steam. Always have steam facing away from you or anyone in the room.
When first using the device, test on an oldcloth, as there may be sediment left from the manufacturing process or transportation.
To stop the flow of steam, depress theSteam button.
Press ON/OFF button to turn unit off.
Unplug the device when it is not in use.

USING 2-IN-1 ATTACHMENT

With the garment steamer off and cool, snap the silicone band attachment over the steam head, ensuring it is firmly affixed. At this point, the silicone band can be used, or you can choose to affix the bristle brush insert into the channel on the top of the silicone band attachment. Press the ON/OFF button to turn steamer on.
NOTE: Only one function of the 2-in-1 attachment can be used at a time.
OPERATING INSTRUCTIONS - USING 2-IN-1 ATTACHMENT

Use extreme care when changing the attachments after the unit has been in use, as the steam head will continue to be hot.

AUTO SHUTOFF FEATURE

When the machine is powered on continuously for 15 minutes, it will enter the automatic power-off mode. Power indicator light will flash to indicate shutoff.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING

Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

Always unplug appliance immediately after use and before cleaning.
Do not place or store appliance where itcan fall or be pulled into a tub or sink.
Do not place in or drop into water orother liquids.
Do not reach for an appliance that hasfallen into water. Unplug immediately.
Use only in a dry area.

burn hazard
To reduce the risk of burns, electric shock, fire, or injury to persons:

This appliance should never be left unattended when plugged in.
This appliance is not a toy and is not to be used by children.
Close supervision is necessary when thisappliance is used near children or individuals with certain disabilities. Unsupervised use could result in fire or personal injury.
Use this appliance only for its intendeduse as described in this manual. Do not use attachments not recommended by the manufacturer.
Rest the appliance on a stable surfacewhen placing on its base.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged or dropped into water. Do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. Return the appliance to an authorized service center for examination and repair.
Do not allow cord to contact heatedsurfaces. Do not pull or twist cord. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing.
This appliance has a polarized plug (oneblade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Never drop or insert any object into anyopening.
Do not use outdoors or operate whereaerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord to operateappliance.
Surfaces of this appliance are hot whenin use. Do not let heated surfaces touch eyes or skin.
Do not place the steam nozzle directly onany surface or on the appliance power cord while it is hot or plugged in.
Unplug this appliance before filling oremptying the water reservoir.
Do not operate steamer without properlyfilling the water container with distilled water.
Never yank cord to disconnect fromoutlet; instead, grasp plug and pull to disconnect.
Burns could occur from touching hotparts, hot water, or steam. Use care when removing water reservoir or when you turn a steam appliance upside down – there may be hot water in reservoir. Always position steamer with head away from you and any other person when turning it on.
Do not hold hand in front of steam.
To reduce likelihood of circuit overload, do not operate another high-wattage appliance on the same circuit.
Use caution when installing or removingan attachment as unit may contain hot water from condensation. Ensure that the unit is off and attachment is dry or cooled off to avoid contact with hot water.
Never steam clothes you, or someoneelse, are wearing.
When emitting steam, this appliance maycause burns if it is used too close to the skin or eyes or if it is used incorrectly. To reduce the risk of contact with hot water emitting from the steam vents, test appliance before use by holding it away from the body.

SAVE THESE INSTRUCTIONS

IMPORTANT
FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

Make sure the unit is unplugged.
Stand the unit on a table and grasp with one hand.
With other hand, pull the reservoir out, away from the steamer body.
The rubber inletcover is located on the top of the water reservoir.
Open the inlet cover and fill the reservoir with water (preferably distilled, which can be found in grocery stores). We recommend that you use distilled water only as this will prevent mineral deposits in the boiler that can reduce performance or clog the water system.
Close the inlet cover and return the reservoir to its place, making sure that it snaps in place and is secure.

CONAIR GARMENT STEAMING ACCESSORIES

(sold separately)

STEAMING TIPS FOR PRESSING

First, test unit on an inconspicuous areaof the item to be steamed, using the regular Steam setting to ensure fabric can tolerate the effects of steam. If there is no evidence of damage, you can proceed to use the steamer on that item.
To prepare your fabric for steaming, brushit with the brush attachment. This will loosen the fibers and allow better steam penetration.
Hang your garment or fabric. NOTE: Avoid using metal clothes hangers, if possible.
Pass the steam jets just above the fabricwhere the wrinkles are. It may take a few passes to remove the wrinkles completely.
For heavier fabrics or severely wrinkledfabrics, you may position the steamer head directly on the fabric for a few seconds to remove wrinkles. Be cautious when working with delicate fabrics.
After use, turn unit off by depressing the ON/OFF button. Empty any remaining water from the tank to avoid leakage. With dry hands, unplug your garment steamer from the outlet.
BE SURE TO PRESS THE ON/OFF BUTTON PRIOR TO UNPLUGGING THE UNIT.
If hanging garment on a door while steaming, be careful not to damage the door with steam.
When steaming, always keep the unit inmotion. Do not continuously hold steamer over an area or touch steamer jets directly to fabric for more than a few seconds, as this can cause damage, including shrinkage, melting, or color shift on certain types of material.
In the case of heavier, durable fabrics suchas wool coats or bedding, the high setting and slower passes with the steamer may be necessary to achieve desired results. As always, start by testing on an inconspicuous area of the item to be steamed, using the regular Steam setting to ensure fabric can tolerate the effects of steam, and adjust your technique, as needed, to obtain the results desired.